CIL62
Based on 1 Customer Validation
CIL62 is a caspase-3/7-independent cell death inducer. The mechanism of action of CIL62 is Necrostatin-1 dependent cell death.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 97.0%
- CAS No.: 117593-36-9
- Formule: C23H26O5
- Masse moléculaire:382.45
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Anti-Cancer Compound Library
HY-L025
-
Covalent Screening Library
HY-L036
-
Cysteine Targeted Covalent Library
HY-L153
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Covalent Screening Library Plus
HY-L036P
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| COLO 205 | IC50 |
28 μM
Compound: 3f
|
Antiproliferative activity against human COLO205 cells after 24 hrs by MTT assay
Antiproliferative activity against human COLO205 cells after 24 hrs by MTT assay
|
[PMID: 22365759] |
| IMR-32 | IC50 |
41 μM
Compound: 3f
|
Antiproliferative activity against human IMR32 cells after 24 hrs by MTT assay
Antiproliferative activity against human IMR32 cells after 24 hrs by MTT assay
|
[PMID: 22365759] |
| K562 | IC50 |
36 μM
Compound: 3f
|
Antiproliferative activity against human K562 cells after 24 hrs by MTT assay
Antiproliferative activity against human K562 cells after 24 hrs by MTT assay
|
[PMID: 22365759] |
19 μM (5 μg/mL) Necrostatin-1 suppresses CIL62, but CIL62 is not suppressed by the ferroptosis inducers (antioxidants or iron-chelators)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 117593-36-9
-
Appearance Solid
-
Masse moléculaire 382.45
-
Formule C23H26O5
-
Color Light yellow to yellow
-
SMILES
O=C1C(C(C2=CC=C(O)C=C2O)C3=C(CC(C)(C)CC3=O)O4)=C4CC(C)(C)C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 125 mg/mL (326.84 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.44 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.44 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6147 mL | 13.0736 mL | 26.1472 mL | 65.3680 mL |
| 5 mM | 0.5229 mL | 2.6147 mL | 5.2294 mL | 13.0736 mL | |
| 10 mM | 0.2615 mL | 1.3074 mL | 2.6147 mL | 6.5368 mL | |
| 15 mM | 0.1743 mL | 0.8716 mL | 1.7431 mL | 4.3579 mL | |
| 20 mM | 0.1307 mL | 0.6537 mL | 1.3074 mL | 3.2684 mL | |
| 25 mM | 0.1046 mL | 0.5229 mL | 1.0459 mL | 2.6147 mL | |
| 30 mM | 0.0872 mL | 0.4358 mL | 0.8716 mL | 2.1789 mL | |
| 40 mM | 0.0654 mL | 0.3268 mL | 0.6537 mL | 1.6342 mL | |
| 50 mM | 0.0523 mL | 0.2615 mL | 0.5229 mL | 1.3074 mL | |
| 60 mM | 0.0436 mL | 0.2179 mL | 0.4358 mL | 1.0895 mL | |
| 80 mM | 0.0327 mL | 0.1634 mL | 0.3268 mL | 0.8171 mL | |
| 100 mM | 0.0261 mL | 0.1307 mL | 0.2615 mL | 0.6537 mL |
CIL62 Related Classifications
HY-136509 Related Classifications
Powered by Bioz