Conteltinib
Based on 1 Customer Validation
Conteltinib (CT-707) is a multi-kinase inhibitor targeting FAK, ALK, and Pyk2. Conteltinib exerts significant inhibitory effect on FAK with an IC50 of 1.6 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.0%
- CAS No.: 1384860-29-0
- Formule: C32H45N9O3S
- Masse moléculaire:635.82
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Kinase Inhibitor Library
HY-L009
-
Protein Tyrosine Kinase Compound Library
HY-L016
-
Anti-Cancer Compound Library
HY-L025
-
Cytoskeleton Compound Library
HY-L060
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Targeted Diversity Library
HY-L099
-
Anti-Pulmonary Fibrosis Compound Library
HY-L125
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Activité biologique
IC50: 1.6 nM (FAK)[1]
Conteltinib (CT-707) synergizes with XL184 to suppress hepatocellular carcinoma by blocking XL184-induced FAK activation[1].
The combination of XL184 (5 μM) and Conteltinib (3 μM) significantly reduces the survival fraction, compared with each agent alone[1].
The combination of XL184 (5 μM) and Conteltinib (3 μM) results in enhanced caspase-dependent apoptosis in human hepatocellular carcinoma cell lines[1].
The FAK phosphorylation induced by XL184 (5 μM) might be involved in the synergistic antitumor effect of Conteltinib (3 μM) and XL184[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:The human hepatocellular carcinoma cell lines HepG2 and Bel-7402
-
Concentration:1.0, 1.5, 2.0, 2.5, and 3.0 μM for HepG2 cells; 0.2, 0.4, 0.8, 1.5, and 3.0 μM for Bel-7402 cells
-
Incubation Time:72 hours
-
Result:When cells were exposed to XL184 (5 μM), Conteltinib (3 μM), or their combination, the survival rates were 57.3%, 39.3%, and 11.2%, respectively, in HepG2; those in Bel-7402 were 57.8%, 61.6%, and 34.2%, respectively.
-
Cell Line:HepG2 and Bel-7402 cells
-
Concentration:3 μM
-
Incubation Time:48 hours
-
Result:The apoptosis rates of control, XL184, Conteltinib, and combination groups in HepG2 were 5.0%, 10.5%, 18.4%, and 41.1%, respectively, and those in Bel-7402 were 4.4%, 16.3%, 8.7%, and 36.4%, respectively.
-
Cell Line:HepG2 and Bel-7402
-
Concentration:3 μM
-
Incubation Time:24 hours
-
Result:Could markedly decrease FAK phosphorylation induced by XL184, which might partially account for the synergetic effect.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Nude mice transplanted with HepG2 xenografts[1]
-
Dosage:50 mg/kg
-
Administration:Intragastrically (i.g.) twice a day for first 3 days, 7th, 8th, 11th, 12th, and 14th days; once a day for 4th, 6th, 9th, 10th, and 13th days; no administration for the 5th day.
-
Result:Caused a moderate decrease in the relative tumor volume (RTV).
The inhibition rate of combination group reached 77.4%, whereas the mono-treatment of XL184 or CT-707 alone caused 30.7% and 19.4% inhibition in the tumor weight, respectively.
Chemical Information
-
CAS No. 1384860-29-0
-
Appearance Solid
-
Masse moléculaire 635.82
-
Formule C32H45N9O3S
-
Color Light yellow to yellow
-
SMILES
O=S(C1=C(C=CC=C1)NC2=C(CCN3)C3=NC(NC(C=CC(N4CCC(N5CCN(C)CC5)CC4)=C6)=C6OC)=N2)(NC(C)C)=O
-
Synonyms
CT-707
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 31.25 mg/mL (49.15 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (3.27 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (3.27 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (280 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.5728 mL | 7.8639 mL | 15.7277 mL | 39.3193 mL |
| 5 mM | 0.3146 mL | 1.5728 mL | 3.1455 mL | 7.8639 mL | |
| 10 mM | 0.1573 mL | 0.7864 mL | 1.5728 mL | 3.9319 mL | |
| 15 mM | 0.1049 mL | 0.5243 mL | 1.0485 mL | 2.6213 mL | |
| 20 mM | 0.0786 mL | 0.3932 mL | 0.7864 mL | 1.9660 mL | |
| 25 mM | 0.0629 mL | 0.3146 mL | 0.6291 mL | 1.5728 mL | |
| 30 mM | 0.0524 mL | 0.2621 mL | 0.5243 mL | 1.3106 mL | |
| 40 mM | 0.0393 mL | 0.1966 mL | 0.3932 mL | 0.9830 mL |
Conteltinib Related Classifications
HY-109084 Related Classifications
Powered by Bioz