Fluorescent DOTAP
Based on 1 Customer Validation
Fluorescent DOTAP (NBD-DOTAP) is a cationic lipid which can be used for nucleic acid and protein delivery. Fluorescent DOTAP is labeled with a fluorophore NBD (maximum excitation/emission wavelength ∼463/536 nm). Fluorescent DOTAP can be used for gene delivery systems, drug delivery, as well as cell imaging and nanocarrier tracking. Fluorescent DOTAP is an ideal candidate for both biological and pharmaceutical formulation (e.g. co-delivery of vaccines) research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 95.95%
- CAS No.: 1010076-97-7
- Formule: C36H60ClN5O7
- Masse moléculaire:710.34
-
Stockage:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Fluorescent DOTAP results in a higher hemolysis with increasing concentration of DOTAP in fusogenic liposomes[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 female mice (6-7 weeks old) with subcutaneous tumors[3]
-
Dosage:0.5% (w/w)
-
Administration:Subcutaneous injection (s.c.), one single dose
-
Result:Showed neither CD8+ or CD8- cells took up NBD after fluorescent DOTAP injection.
Demonstrated the main uptake is by DC (80%) soon after immunization.
Induced migration of activated DC to the DLN.
Resulted in DC-T cell interactions and eliciting T cell responses.
Chemical Information
-
CAS No. 1010076-97-7
-
Appearance Solid
-
Masse moléculaire 710.34
-
Formule C36H60ClN5O7
-
Color Orange to reddish brown
-
SMILES
CCCCCCCC/C=C\CCCCCCCC(OCC(OC(CCCCCNC1=CC=C([N+]([O-])=O)C2=NON=C21)=O)C[N+](C)(C)C)=O.[Cl-]
-
Synonyms
NBD-DOTAP
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvant et solubilité
DMSO : 20 mg/mL (28.16 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2 mg/mL (2.82 mM); Clear solution
This protocol yields a clear solution of ≥ 2 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (268 KB)
-
SDS (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Simberg, D., et al., (2004). DOTAP (and other cationic lipids): chemistry, biophysics, and transfection. Critical reviews in therapeutic drug carrier systems, 21(4), 257-317. [Content Brief]
[2]. Matos, A. L. L., et al., (2017). Delivery of cationic quantum dots using fusogenic liposomes in living cells. Journal of photochemistry and photobiology. B, Biology, 171, 43-49. [Content Brief]
[3]. Chen, W., et al., (2008). A simple but effective cancer vaccine consisting of an antigen and a cationic lipid. Cancer immunology, immunotherapy : CII, 57(4), 517-530. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.4078 mL | 7.0389 mL | 14.0778 mL | 35.1944 mL |
| 5 mM | 0.2816 mL | 1.4078 mL | 2.8156 mL | 7.0389 mL | |
| 10 mM | 0.1408 mL | 0.7039 mL | 1.4078 mL | 3.5194 mL | |
| 15 mM | 0.0939 mL | 0.4693 mL | 0.9385 mL | 2.3463 mL | |
| 20 mM | 0.0704 mL | 0.3519 mL | 0.7039 mL | 1.7597 mL | |
| 25 mM | 0.0563 mL | 0.2816 mL | 0.5631 mL | 1.4078 mL |
Fluorescent DOTAP Related Classifications
HY-143702 Related Classifications
Powered by Bioz