Maltol
Based on 2 publication(s) in Google Scholar
Maltol, a type of aromatic compound, is an antioxidant agent. Maltol enhances neural function by mitigating oxidative stress and cell apoptosis. Maltol is an inhibitor of oxidative damage in nerve cells and is effective in preventing diabetic peripheral neuropathy (DPN). Maltol is used extensively as a safe flavoring agent and food preservative. Maltol is a metal ion chelator that can be used in the field of catalysis, cosmetics, and medicine.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.98%
- CAS No.: 118-71-8
- Formule: C6H6O3
- Masse moléculaire:126.11
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Maltol
More-
IF
Voir tous les produits spécifiques à Isoform Endogenous Metabolite
More
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Neutrophil | IC50 |
5.59 μg/mL
Compound: 25
|
Anti-inflammatory activity in human neutrophils assessed as inhibition of FMLP/CB-induced superoxide anion generation
Anti-inflammatory activity in human neutrophils assessed as inhibition of FMLP/CB-induced superoxide anion generation
|
[PMID: 21848266] |
| Neutrophil | IC50 |
7.03 μg/mL
Compound: 25
|
Anti-inflammatory activity in human neutrophils assessed as inhibition of FMLP/CB-induced elastase release
Anti-inflammatory activity in human neutrophils assessed as inhibition of FMLP/CB-induced elastase release
|
[PMID: 21848266] |
Maltol (0.1-0.5 mM) significantly increases the viability of RSC96 cells co-incubated with H2O2, elevates anti-apoptotic Bcl-XL expression, and reduces pro-apoptotic BAX and caspase-3 expression[1].
Maltol (2 mM; pretreatment for 2 hours) protects SH-SY5Y cells from H2O2-induced oxidative damage through antioxidant and anti-apoptotic mechanisms[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:SH-SY5Y (human neuroblastoma cell line)
-
Concentration:2 mM
-
Incubation Time:Pretreatment for 2 hours, followed by treatment with H2O2 (100, 200, 300 µM) for 10 hours
-
Result:Significantly reduced H2O2-induced cell apoptosis, reduced the percentage of phosphatidylserine externalization, DNA fragmentation and intracellular Ca²⁺ concentration, enhanced mitochondrial function, and reduced NF-κB activation.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Sprague-Dawley (SD) rats, Streptozotocin (HY-13753) (STZ, 65 mg/kg, ip)-induced diabetic model[1]
-
Dosage:50 mg/kg, 100 mg/kg, and 200 mg/kg (0.5% CMC-Na (HY-Y0703))
-
Administration:Oral gavage, once daily for 12 weeks
-
Result:Significantly improved motor nerve conduction velocity (MNCV), alleviated thermal and mechanical hyperalgesia, and enhanced Na+-K+-ATPase activity. Also increased antioxidant capacity (increased TAOC, SOD and GSH levels, reduced MDA levels) and reduced apoptosis markers in sciatic nerves.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 118-71-8
-
Appearance Solid
-
Masse moléculaire 126.11
-
Formule C6H6O3
-
Color White to off-white
-
SMILES
O=C1C(O)=C(C)OC=C1
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Inflammopharmacology
Maltol ameliorates intervertebral disc degeneration through inhibiting PI3K/AKT/NF-κB pathway and regulating NLRP3 inflammasome-mediated pyroptosis. [Abstract]2023 Feb;31(1):369-384. PMID: 36401729
Maltol purchased from MedChemExpress. Usage Cited in: Inflammopharmacology. 2023 Feb;31(1):369-384. [Abstract]
Maltol (MA; 20 µM) dramatically promotes cell proliferation among IL-1β-treated NPCs.
-
Oxid Med Cell Longev
Maltol Promotes Mitophagy and Inhibits Oxidative Stress via the Nrf2/PINK1/Parkin Pathway after Spinal Cord Injury. [Abstract]2022 Feb 1:2022:1337630. PMID: 35154562
Solvant et solubilité
DMSO : 100 mg/mL (792.96 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 1.82 mg/mL (14.43 mM; ultrasonic and warming and heat to 60°C)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (19.82 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (19.82 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 3.33 mg/mL (26.41 mM); Clear solution; Need ultrasonic and warming and heat to 60°C
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (280 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Guo N, et al. Maltol, a food flavor enhancer, attenuates diabetic peripheral neuropathy in streptozotocin-induceddiabetic rats. Food Funct. 2018 Dec 13;9(12):6287-6297. [Content Brief]
[2]. Yang Y, et al. Maltol inhibits apoptosis of human neuroblastoma cells induced by hydrogen peroxide. J Biochem Mol Biol. 2006 Mar 31;39(2):145-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 7.9296 mL | 39.6479 mL | 79.2959 mL | 198.2396 mL |
| 5 mM | 1.5859 mL | 7.9296 mL | 15.8592 mL | 39.6479 mL | |
| 10 mM | 0.7930 mL | 3.9648 mL | 7.9296 mL | 19.8240 mL | |
| DMSO | 15 mM | 0.5286 mL | 2.6432 mL | 5.2864 mL | 13.2160 mL |
| 20 mM | 0.3965 mL | 1.9824 mL | 3.9648 mL | 9.9120 mL | |
| 25 mM | 0.3172 mL | 1.5859 mL | 3.1718 mL | 7.9296 mL | |
| 30 mM | 0.2643 mL | 1.3216 mL | 2.6432 mL | 6.6080 mL | |
| 40 mM | 0.1982 mL | 0.9912 mL | 1.9824 mL | 4.9560 mL | |
| 50 mM | 0.1586 mL | 0.7930 mL | 1.5859 mL | 3.9648 mL | |
| 60 mM | 0.1322 mL | 0.6608 mL | 1.3216 mL | 3.3040 mL | |
| 80 mM | 0.0991 mL | 0.4956 mL | 0.9912 mL | 2.4780 mL | |
| 100 mM | 0.0793 mL | 0.3965 mL | 0.7930 mL | 1.9824 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.