Cinnamaldehyde
Based on 3 publication(s) in Google Scholar
Cinnamaldehyde is a major and a bioactive compound isolated from the leaves of Cinnamomum osmophloeum kaneh. Cinnamaldehyde is a cytokine production inhibitor. Cinnamaldehyde has anti-bacteria, anti-oxidation, and anti-inflammatory properties.
For research use only. We do not sell to patients.
- Purity : 95.01%
- CAS No.: 104-55-2
- Formula: C9H8O
- Molecular Weight:132.16
-
Storage:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications Citing Use of MedChemExpress (MCE) Cinnamaldehyde
More
Biological Activity
Description
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| CHO | EC50 |
6.5 μM
Compound: 15
|
Activation of TRPA1 channel expressed in CHO cells assessed as increase in intracellular calcium levels
Activation of TRPA1 channel expressed in CHO cells assessed as increase in intracellular calcium levels
|
[PMID: 20356305] |
| CHO | EC50 |
61 μM
Compound: CA
|
Agonist activity at mouse TRPA1 expressed in CHO cells assessed as increase in calcium influx by Fluo-3 based FLIPR analysis
Agonist activity at mouse TRPA1 expressed in CHO cells assessed as increase in calcium influx by Fluo-3 based FLIPR analysis
|
[PMID: 30878828] |
| HCT-8 | IC50 |
15.6 μM
Compound: 12; CA
|
Antiproliferative activity against human HCT8 cells after 72 hrs in presence of aspirin by MTT assay
Antiproliferative activity against human HCT8 cells after 72 hrs in presence of aspirin by MTT assay
|
[PMID: 30037494] |
| HCT-8 | IC50 |
29.4 μM
Compound: 12; CA
|
Antiproliferative activity against human HCT8 cells after 72 hrs by MTT assay
Antiproliferative activity against human HCT8 cells after 72 hrs by MTT assay
|
[PMID: 30037494] |
| HEK293 | EC50 |
51.4 μM
Compound: CA 3
|
Agonist activity at human TRPA1 expressed in HEK293 cells assessed as [45]Ca2+ influx by microbeta plate count
Agonist activity at human TRPA1 expressed in HEK293 cells assessed as [45]Ca2+ influx by microbeta plate count
|
[PMID: 19945872] |
| HEK293 | EC50 |
9 μM
Compound: CA
|
Agonist activity at human TRPA1 expressed in HEK293 cells assessed as increase in calcium influx by Fluo-4-AM dye based fluorescence assay
Agonist activity at human TRPA1 expressed in HEK293 cells assessed as increase in calcium influx by Fluo-4-AM dye based fluorescence assay
|
[PMID: 30878828] |
| RAW264.7 | IC50 |
43 μM
Compound: CA
|
Inhibition of NF-kappaB transfected in LPS-stimulated mouse RAW264.7 cells
Inhibition of NF-kappaB transfected in LPS-stimulated mouse RAW264.7 cells
|
[PMID: 18823786] |
In Vitro
Cinnamaldehyde inhibits ROS release and the activation of MAPKs as well as pro-inflammatory cytokines expression within TLRs activated cultured monocytes/macrophages[1]
.
Cinnamaldehyde induces apoptosis by mitochondrial permeability transition in human promyelocytic leukemia HL-60 cells, and induces apoptosis in human hepatoma cells through activation of the proapoptotic Bcl-2 family proteins[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
Chemical Information
-
CAS No. 104-55-2
-
Appearance Liquid (Density: 1.05 g/cm3)
-
Molecular Weight 132.16
-
Formula C9H8O
-
Color Colorless to yellow
-
SMILES
O=CC=CC=1C=CC=CC1
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Phytomedicine
Cinnamaldehyde activates AMPK/PGC-1α pathway via targeting GRK2 to ameliorate heart failure. [Abstract]2024 Oct:133:155894. PMID: 39089090 -
Biol Reprod
Aerobic exercises regulate the epididymal anion homeostasis of high-fat diet induced obese rats through TRPA1-mediated cl- and HCO3- secretion. [Abstract]2023 Jul 11;109(1):53-64. PMID: 37154585 -
Solvent & Solubility
In Vitro:
DMSO : 100 mg/mL (756.66 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (18.92 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (18.92 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocols
-
Research Protocol for Inflammation-related Diseases
The NLRP3 inflammasome is a cytosolic innate immune signaling platform that integrates priming signals and danger-signal activation to promote caspase-1 activation, maturation of IL-1β and IL-18, and gasdermin D-mediated pyroptotic cell death. The core experimental logic is to determine whether inflammatory disease phenotypes are driven by increased NLRP3 expression, ASC-containing inflammasome assembly, caspase-1 cleavage, GSDMD cleavage, and extracellular release of IL-1β/IL-18 rather than by nonspecific cell injury alone. The pathway is strongly linked to inflammation-related disease phenotypes because monosodium urate crystals activate NALP3/NLRP3 inflammasome signaling in gout-like crystal inflammation, cholesterol crystals activate NLRP3 inflammasomes in atherogenesis models, and DSS-induced intestinal inflammation has been reported to involve NLRP3 inflammasome activity. However, experimental colitis studies also show context-dependent protective effects of NLRP3 inflammasome co
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 7.5666 mL | 37.8329 mL | 75.6659 mL | 189.1646 mL |
| 5 mM | 1.5133 mL | 7.5666 mL | 15.1332 mL | 37.8329 mL | |
| 10 mM | 0.7567 mL | 3.7833 mL | 7.5666 mL | 18.9165 mL | |
| 15 mM | 0.5044 mL | 2.5222 mL | 5.0444 mL | 12.6110 mL | |
| 20 mM | 0.3783 mL | 1.8916 mL | 3.7833 mL | 9.4582 mL | |
| 25 mM | 0.3027 mL | 1.5133 mL | 3.0266 mL | 7.5666 mL | |
| 30 mM | 0.2522 mL | 1.2611 mL | 2.5222 mL | 6.3055 mL | |
| 40 mM | 0.1892 mL | 0.9458 mL | 1.8916 mL | 4.7291 mL | |
| 50 mM | 0.1513 mL | 0.7567 mL | 1.5133 mL | 3.7833 mL | |
| 60 mM | 0.1261 mL | 0.6305 mL | 1.2611 mL | 3.1527 mL | |
| 80 mM | 0.0946 mL | 0.4729 mL | 0.9458 mL | 2.3646 mL | |
| 100 mM | 0.0757 mL | 0.3783 mL | 0.7567 mL | 1.8916 mL |