(6S,12aR)-Tadalafil
Based on 1 Customer Validation
(6S,12aR)-Tadalafil (Tadalafil EP Impurity C) is a highly potent PDE5 inhibitor with an IC50 value of 5 nM and has blood pressure lowering activity.
For research use only. We do not sell to patients.
- Purity: 99.48%
- CAS No.: 171596-28-4
- Formula: C22H19N3O4
- Molecular Weight:389.40
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Chemical Information
-
CAS No. 171596-28-4
-
Appearance Solid
-
Molecular Weight 389.40
-
Formula C22H19N3O4
-
Color White to off-white
-
SMILES
O=C([C@@]1([H])CC2=C([C@H](C3=CC=C(OCO4)C4=C3)N15)NC6=C2C=CC=C6)N(C)CC5=O
-
Synonyms
Tadalafil EP Impurity C; (6S,12aR)-IC-351
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (256.81 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5681 mL | 12.8403 mL | 25.6805 mL | 64.2013 mL |
| 5 mM | 0.5136 mL | 2.5681 mL | 5.1361 mL | 12.8403 mL | |
| 10 mM | 0.2568 mL | 1.2840 mL | 2.5681 mL | 6.4201 mL | |
| 15 mM | 0.1712 mL | 0.8560 mL | 1.7120 mL | 4.2801 mL | |
| 20 mM | 0.1284 mL | 0.6420 mL | 1.2840 mL | 3.2101 mL | |
| 25 mM | 0.1027 mL | 0.5136 mL | 1.0272 mL | 2.5681 mL | |
| 30 mM | 0.0856 mL | 0.4280 mL | 0.8560 mL | 2.1400 mL | |
| 40 mM | 0.0642 mL | 0.3210 mL | 0.6420 mL | 1.6050 mL | |
| 50 mM | 0.0514 mL | 0.2568 mL | 0.5136 mL | 1.2840 mL | |
| 60 mM | 0.0428 mL | 0.2140 mL | 0.4280 mL | 1.0700 mL | |
| 80 mM | 0.0321 mL | 0.1605 mL | 0.3210 mL | 0.8025 mL | |
| 100 mM | 0.0257 mL | 0.1284 mL | 0.2568 mL | 0.6420 mL |