Dimethyl-bisphenol A
Based on 1 Customer Validation
Dimethyl-bisphenol A (DMBPA) is a potent HIF-1α inhibitor. Dimethyl-bisphenol A can decrease Vegfa mRNA expression.
For research use only. We do not sell to patients.
- Purity: 99.78%
- CAS No.: 1568-83-8
- Formula: C17H20O2
- Molecular Weight:256.34
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Biological Activity
Dimethyl-bisphenol A (DMBPA; 50 μM; 30 min) significantly inhibits Vegfa120 and Vegfa164 expression in large osteoclasts (OCs)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1568-83-8
-
Appearance Solid
-
Molecular Weight 256.34
-
Formula C17H20O2
-
Color White to off-white
-
SMILES
COC(C=C1)=CC=C1C(C)(C)C(C=C2)=CC=C2OC
-
Synonyms
DMBPA
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : ≥ 100 mg/mL (390.11 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (9.75 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.9011 mL | 19.5053 mL | 39.0107 mL | 97.5267 mL |
| 5 mM | 0.7802 mL | 3.9011 mL | 7.8021 mL | 19.5053 mL | |
| 10 mM | 0.3901 mL | 1.9505 mL | 3.9011 mL | 9.7527 mL | |
| 15 mM | 0.2601 mL | 1.3004 mL | 2.6007 mL | 6.5018 mL | |
| 20 mM | 0.1951 mL | 0.9753 mL | 1.9505 mL | 4.8763 mL | |
| 25 mM | 0.1560 mL | 0.7802 mL | 1.5604 mL | 3.9011 mL | |
| 30 mM | 0.1300 mL | 0.6502 mL | 1.3004 mL | 3.2509 mL | |
| 40 mM | 0.0975 mL | 0.4876 mL | 0.9753 mL | 2.4382 mL | |
| 50 mM | 0.0780 mL | 0.3901 mL | 0.7802 mL | 1.9505 mL | |
| 60 mM | 0.0650 mL | 0.3251 mL | 0.6502 mL | 1.6254 mL | |
| 80 mM | 0.0488 mL | 0.2438 mL | 0.4876 mL | 1.2191 mL | |
| 100 mM | 0.0390 mL | 0.1951 mL | 0.3901 mL | 0.9753 mL |