DOTA-NHS-ester
Based on 1 publication(s) in Google Scholar
DOTA-NHS-ester is a linker for affibody molecules and is applied in small animals PET, SPECT, and CT. DOTA-NHS-ester can be used to label radiotherapeutic agents or imaging probes for the detection of tumors.
For research use only. We do not sell to patients.
- Purity: 95.0%
- CAS No.: 170908-81-3
- Formula: C20H31N5O10
- Molecular Weight:501.49
-
Storage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) DOTA-NHS-ester
More-
In Vivo Efficacy Study
-
In Vivo Efficacy Study
Biological Activity
DOTA-NHS-ester can be used to modify human serum albumin (HSA) to produce DOTA-HSA. And DOTA-HSA is furtherly modified by Sulfo-SMCC (HY-D0975) to obtain DOTA-HSA-SMCC. DOTA-HSA-SMCC is conjugated to ZHER2:342 and the final product is DOTA-HSA-ZHER2:342[1]. In a cell uptake assay, DOTA-HSA-ZHER2:342 is labeled by 64Cu, 64Cu-DOTA-HSA-ZHER2:342 (0.5-2 hours) slowly accumulates in the SKOV3 cells and reaches 0.71% of the applied activity at 0.5 h and the uptake increased to 1.58% at 2 h[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 170908-81-3
-
Appearance Solid
-
Molecular Weight 501.49
-
Formula C20H31N5O10
-
Color White to off-white
-
SMILES
O=C(ON1C(CCC1=O)=O)CN2CCN(CC(O)=O)CCN(CC(O)=O)CCN(CC(O)=O)CC2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
DOTA-NHS-ester purchased from MedChemExpress. Usage Cited in: Adv Nanobiomed Res. 2023 Sep 3.
PSP–NH2 was incubated with DOTA–NHS–ester for 1 h and conjugated with mPEG–NHS. Then, the particles were mixed with 64Cu (OAc)2 at 50 ℃ for 1 h to obtain the 64Cu-labelled PSP. PSP@Ab@PEG exhibited increased blood circulation in BALB/c mice with blood clearance half-life periods found to be 12 min.
DOTA-NHS-ester purchased from MedChemExpress. Usage Cited in: Adv Nanobiomed Res. 2023 Sep 3.
PSP–NH2 was incubated with DOTA–NHS–ester for 1 h and conjugated with mPEG–NHS. Then, the particles were mixed with 64Cu (OAc)2 at 50 ℃ for 1 h to obtain the 64Cu-labelled PSP. More PSP–NH2 accumulated in the liver site while a lot more PSP@Ab@PEG accumulated in the spleen.
Solvent & Solubility
DMSO : 50 mg/mL (99.70 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.99 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.99 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9941 mL | 9.9703 mL | 19.9406 mL | 49.8514 mL |
| 5 mM | 0.3988 mL | 1.9941 mL | 3.9881 mL | 9.9703 mL | |
| 10 mM | 0.1994 mL | 0.9970 mL | 1.9941 mL | 4.9851 mL | |
| 15 mM | 0.1329 mL | 0.6647 mL | 1.3294 mL | 3.3234 mL | |
| 20 mM | 0.0997 mL | 0.4985 mL | 0.9970 mL | 2.4926 mL | |
| 25 mM | 0.0798 mL | 0.3988 mL | 0.7976 mL | 1.9941 mL | |
| 30 mM | 0.0665 mL | 0.3323 mL | 0.6647 mL | 1.6617 mL | |
| 40 mM | 0.0499 mL | 0.2493 mL | 0.4985 mL | 1.2463 mL | |
| 50 mM | 0.0399 mL | 0.1994 mL | 0.3988 mL | 0.9970 mL | |
| 60 mM | 0.0332 mL | 0.1662 mL | 0.3323 mL | 0.8309 mL | |
| 80 mM | 0.0249 mL | 0.1246 mL | 0.2493 mL | 0.6231 mL |