Etzadroxil
Based on 1 Customer Validation
Etzadroxil (Ethyl 2-Ethylbutyrate) is a volatile ester compound. Sulopenem Etzadroxil is an orally available ester proagent form of Sulopenem, an antibiotic with broad-spectrum activities against Gram-positive and Gram-negative bacteria.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 97.0%
- No. CAS: 2983-38-2
- Fòrmula: C8H16O2
- Peso molecular:144.21
-
Almacenamiento:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
Sulopenem Etzadroxil is an orally available ester prodrug form of sulopenem. After oral administration of sulopenem etzadroxil, the ester bond is cleaved, releasing active Sulopenem[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
No. CAS 2983-38-2
-
Appearance Liquid (Density: 0.864 g/cm3)
-
Peso molecular 144.21
-
Fòrmula C8H16O2
-
Color Colorless to light yellow
-
SMILES
CCC(CC)C(=O)OCC
-
Synonyms
Ethyl 2-Ethylbutyrate
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 100 mg/mL (693.43 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (17.34 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (17.34 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (270 KB)
-
SDS (466 KB)
- English - EN (466 KB)
- Français - FR (466 KB)
- Deutsch - DE (466 KB)
- Norwegian - NO (466 KB)
- Español - ES (466 KB)
- Swedish - SV (466 KB)
- Italian - IT (466 KB)
- Korean - KR (466 KB)
- Portuguese - PT (466 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Roberto Rodríguez Madrera, et al. Determination of volatile compounds in cider spirits by gas chromatography with direct injection. J Chromatogr Sci. 2007 Aug;45(7):428-34. [Content Brief]
[2]. Ben Turner, et al. Interscience Conference on Antimicrobial Agents and Chemotherapy--49th annual meeting. Part 2. 12-15 September 2009, San Francisco, CA, USA. IDrugs. 2009 Nov;12(11):670-2. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 6.9343 mL | 34.6717 mL | 69.3433 mL | 173.3583 mL |
| 5 mM | 1.3869 mL | 6.9343 mL | 13.8687 mL | 34.6717 mL | |
| 10 mM | 0.6934 mL | 3.4672 mL | 6.9343 mL | 17.3358 mL | |
| 15 mM | 0.4623 mL | 2.3114 mL | 4.6229 mL | 11.5572 mL | |
| 20 mM | 0.3467 mL | 1.7336 mL | 3.4672 mL | 8.6679 mL | |
| 25 mM | 0.2774 mL | 1.3869 mL | 2.7737 mL | 6.9343 mL | |
| 30 mM | 0.2311 mL | 1.1557 mL | 2.3114 mL | 5.7786 mL | |
| 40 mM | 0.1734 mL | 0.8668 mL | 1.7336 mL | 4.3340 mL | |
| 50 mM | 0.1387 mL | 0.6934 mL | 1.3869 mL | 3.4672 mL | |
| 60 mM | 0.1156 mL | 0.5779 mL | 1.1557 mL | 2.8893 mL | |
| 80 mM | 0.0867 mL | 0.4334 mL | 0.8668 mL | 2.1670 mL | |
| 100 mM | 0.0693 mL | 0.3467 mL | 0.6934 mL | 1.7336 mL |
Etzadroxil Related Classifications
HY-W127442 Related Classifications
Powered by Bioz