LP-261
Based on 1 Customer Validation
LP-261 is a potent and orally active anti-mitotic agent and shows an inhibition of in vitro tubulin polymerization with an EC50 of 3.2 μM. LP-261 inhibits growth of a human non-small-cell lung tumor (NCI-H522) in vivo and can be used for cancer research.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.94%
- No. CAS: 915412-67-8
- Fòrmula: C22H19N3O4S
- Peso molecular:421.47
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
EC50: 3.2 μM (tubulin polymerization)[1]
LP-261 shows potent G2/M block activity in multiple cell lines and exhibits a range of activity from 0.01μM to 0.38 μM across the tested cell lines, the IC50 values for MCF-7, H522, Jurkat, SW-620, BXPC-3, and PC-3 values are 0.01 μM, 0.01 μM, 0.02 μM, 0.05 μM, 0.05μM and 0.07 μM, respectively[1].LP-261 exhibits low micromolar potency in the tubulin polymerization assay, the EC50 value of LP-261 is 5.0 μM[1]. LP-261 has the ability to compete with colchicine for binding to tubulin in a [3H]colchicine competition binding assay, the EC50 (3.2 μM) for LP-261 to inhibit the binding with a potency similar to that of colchicine itself, and it exhibits a 79% inhibition at a conctration of 30 μM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Human tumor xenograft model (Injected with NCI-H522 human non-small-cell) in NCr-nu mice[1]
-
Dosage:15 or 50 mg/kg
-
Administration:Oral gavage; 15 or 50 mg/kg; twice daily; 28 days
-
Result:Had potent anti-tumor efficacy at high dosage and exhibited no significant changes in body weights.
Chemical Information
-
No. CAS 915412-67-8
-
Appearance Solid
-
Peso molecular 421.47
-
Fòrmula C22H19N3O4S
-
Color White to off-white
-
SMILES
CS(=O)(NC1=CC(C(C2=CC(OC)=NC=C2)=O)=CC(C3=CC=CC4=C3C=CN4)=C1)=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 33.33 mg/mL (79.08 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.93 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3726 mL | 11.8632 mL | 23.7265 mL | 59.3162 mL |
| 5 mM | 0.4745 mL | 2.3726 mL | 4.7453 mL | 11.8632 mL | |
| 10 mM | 0.2373 mL | 1.1863 mL | 2.3726 mL | 5.9316 mL | |
| 15 mM | 0.1582 mL | 0.7909 mL | 1.5818 mL | 3.9544 mL | |
| 20 mM | 0.1186 mL | 0.5932 mL | 1.1863 mL | 2.9658 mL | |
| 25 mM | 0.0949 mL | 0.4745 mL | 0.9491 mL | 2.3726 mL | |
| 30 mM | 0.0791 mL | 0.3954 mL | 0.7909 mL | 1.9772 mL | |
| 40 mM | 0.0593 mL | 0.2966 mL | 0.5932 mL | 1.4829 mL | |
| 50 mM | 0.0475 mL | 0.2373 mL | 0.4745 mL | 1.1863 mL | |
| 60 mM | 0.0395 mL | 0.1977 mL | 0.3954 mL | 0.9886 mL |
LP-261 Related Classifications
HY-14389 Related Classifications
Powered by Bioz