ME1111
Based on 1 Customer Validation
ME1111 is an antifungal agent that is active against dermatophytes. ME1111 is an inhibitor of the succinate dehydrogenase of Trichophyton species. ME1111 has an excellent ability to penetrate human nails and is used for onychomycosis research.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.95%
- No. CAS: 1391758-52-3
- Fòrmula: C12H14N2O
- Peso molecular:202.25
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
dermatophytes[1]
ME1111 inhibits T. mentagrophytes TIMM 2789, with MICs of 0.5 μg/mL and 0.25 μg/mL in RPMI 1640 medium and SDB, respectively[1].
ME1111 mainly affects the permeability of the cell membrane[1].
ME1111 strongly inhibits the succinate-2,6-dichlorophenolindophenol reductase reaction in Trichophyton rubrum and T. mentagrophytes (IC50: 0.029 μg/mL, 0.025 μg/mL) but only shows moderate inhibition of the same reaction in human cell lines[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:T. mentagrophytes TIMM 2789
-
Concentration:0.125 μg/mL, 0.0625 μg/mL
-
Incubation Time:4 hours, 8 hours, 24 hours
-
Result:Inhibited the hyphal growth in a dose-dependent and time-dependent manner, and induced various morphological alterations.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
No. CAS 1391758-52-3
-
Appearance Solid
-
Peso molecular 202.25
-
Fòrmula C12H14N2O
-
Color White to light yellow
-
SMILES
OC1=C(N2N=C(C)C=C2C)C=CC(C)=C1
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 100 mg/mL (494.44 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (12.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (12.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Nishiyama Y, et al. Morphological Effect of the New Antifungal Agent ME1111 on Hyphal Growth of Trichophyton mentagrophytes, Determined by Scanning and Transmission Electron Microscopy. Antimicrob Agents Chemother. 2016 Dec 27;61(1). [Content Brief]
[2]. Takahata S, et al. Mechanism of Action of ME1111, a Novel Antifungal Agent for Topical Treatment of Onychomycosis. Antimicrob Agents Chemother. 2015 Nov 23;60(2):873-80. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.9444 mL | 24.7219 mL | 49.4438 mL | 123.6094 mL |
| 5 mM | 0.9889 mL | 4.9444 mL | 9.8888 mL | 24.7219 mL | |
| 10 mM | 0.4944 mL | 2.4722 mL | 4.9444 mL | 12.3609 mL | |
| 15 mM | 0.3296 mL | 1.6481 mL | 3.2963 mL | 8.2406 mL | |
| 20 mM | 0.2472 mL | 1.2361 mL | 2.4722 mL | 6.1805 mL | |
| 25 mM | 0.1978 mL | 0.9889 mL | 1.9778 mL | 4.9444 mL | |
| 30 mM | 0.1648 mL | 0.8241 mL | 1.6481 mL | 4.1203 mL | |
| 40 mM | 0.1236 mL | 0.6180 mL | 1.2361 mL | 3.0902 mL | |
| 50 mM | 0.0989 mL | 0.4944 mL | 0.9889 mL | 2.4722 mL | |
| 60 mM | 0.0824 mL | 0.4120 mL | 0.8241 mL | 2.0602 mL | |
| 80 mM | 0.0618 mL | 0.3090 mL | 0.6180 mL | 1.5451 mL | |
| 100 mM | 0.0494 mL | 0.2472 mL | 0.4944 mL | 1.2361 mL |
ME1111 Related Classifications
HY-108012 Related Classifications
Powered by Bioz