Imrecoxib
Based on 1 Customer Validation
Imrecoxib (BAP-909) is a novel and selective cyclooxygenase 2 (COX-2) inhibitor with an IC50 value of 18 nM, it also inhibits COX1- activity with an IC50 value of 115 nM. Imrecoxib (BAP-909) has anti-inflammatory effect.
For research use only. We do not sell to patients.
- Purity: 99.48%
- CAS No.: 395683-14-4
- Formula: C21H23NO3S
- Molecular Weight:369.48
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
Human COX-1 115 nM (IC50) |
Human COX-2 18 nM (IC50) |
Imrecoxib (BAP-909) (0.1-10 µM; 24 hours) decreases COX-2 mRNA level induced by PMA+LPS at a dose dependent manner in U937 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:U937 cells
-
Concentration:0.1 µM; 1 µM; 10 µM
-
Incubation Time:24 hours
-
Result:Decreased COX-2 mRNA level.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Rat carrageenan-induced edema model[1]
-
Dosage:5 mg/kg, 10 mg/kg, 20 mg/kg
-
Administration:Gastrointestinal administration; 5-20 mg/kg; 1 hour before carrageenan injection
-
Result:Inhibited the edema response with different doses.
-
Animal Model:Rat adjuvant-induced arthritis (AIA) model[1]
-
Dosage:5 mg/kg, 10 mg/kg, 20 mg/kg
-
Administration:Gastrointestinal administration; 5-20 mg/kg; started on day 7; 26 days
-
Result:Inhibited adjuvant-induced chronic inflammation at the doses of 10 and 20 mg/kg.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 395683-14-4
-
Appearance Solid
-
Molecular Weight 369.48
-
Formula C21H23NO3S
-
Color White to off-white
-
SMILES
O=C1N(CCC)CC(C2=CC=C(S(=O)(C)=O)C=C2)=C1C3=CC=C(C)C=C3
-
Synonyms
BAP-909
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (270.65 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.63 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7065 mL | 13.5325 mL | 27.0651 mL | 67.6627 mL |
| 5 mM | 0.5413 mL | 2.7065 mL | 5.4130 mL | 13.5325 mL | |
| 10 mM | 0.2707 mL | 1.3533 mL | 2.7065 mL | 6.7663 mL | |
| 15 mM | 0.1804 mL | 0.9022 mL | 1.8043 mL | 4.5108 mL | |
| 20 mM | 0.1353 mL | 0.6766 mL | 1.3533 mL | 3.3831 mL | |
| 25 mM | 0.1083 mL | 0.5413 mL | 1.0826 mL | 2.7065 mL | |
| 30 mM | 0.0902 mL | 0.4511 mL | 0.9022 mL | 2.2554 mL | |
| 40 mM | 0.0677 mL | 0.3383 mL | 0.6766 mL | 1.6916 mL | |
| 50 mM | 0.0541 mL | 0.2707 mL | 0.5413 mL | 1.3533 mL | |
| 60 mM | 0.0451 mL | 0.2255 mL | 0.4511 mL | 1.1277 mL | |
| 80 mM | 0.0338 mL | 0.1692 mL | 0.3383 mL | 0.8458 mL | |
| 100 mM | 0.0271 mL | 0.1353 mL | 0.2707 mL | 0.6766 mL |