Esonarimod
Based on 1 Customer Validation
Esonarimod (KE-298) is an antirheumatic agent.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.85%
- CAS No.: 101973-77-7
- 화학식: C14H16O4S
- 분자량:280.34
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Biological Activity
Esonarimod (KE-298) (10 to 300 μg/mL) suppresses the production of NO by RAW264.7 cells in a dose dependent manner. The IC50 of Esonarimod is 117.5 μg/mL. Esonarimod does not affect cellular viability at these tested doses. Esonarimod has no direct effect on NOS activity in cell-free extracts of RAW264.7 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 101973-77-7
-
Appearance Solid
-
분자량 280.34
-
화학식 C14H16O4S
-
Color White to off-white
-
SMILES
CC1=CC=C(C(CC(CSC(C)=O)C(O)=O)=O)C=C1
-
Synonyms
KE-298
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
용액&용해도
DMSO : 100 mg/mL (356.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.92 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.92 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Enzyme activity of NOS is determined using an assay kit for NOS activity. Briefly, the lysate from RAW264.7 cells (a protein concentration of 37.5 μg/200 μL) is incubated for 3 h at 37°C with 100 mM of L-arginine in the presence of Esonarimod (KE-298) and the conversion of L-arginine to nitrite is monitored. The nitrite generated in the reaction mixture is assayed using Griess reagent[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
RAW264.7 cells are used in this study. For NO production, RAW264.7 cells [2×105/0.2 mL of RPMI-1640 supplemented by 10% heat inactivated fetal bovine serum (FBS), penicillin G (100 U/mL), and streptomycin (100 μg/mL)] are stimulated with 100 ng/mL of Escherichia coli 026:B6 lipopolysaccharide in the presence of Esonarimod (KE-298) (0, 10, 30, 100, 200, 300 μg/mL) in 96 well plates and incubated 24 h at 37°C in an atmosphere of 5% CO2 in air. After incubation, the supernatants are collected and assayed for nitrite (NO2-) instead of NO[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Seven-week-old male Wistar rats are used in this study. The animals are fasted overnight before dosing and for up to 4 h after dosing, except for the study on tissue distribution after repeated oral administration. The rats are grouped, three or four rats per group. Esonarimod (14C-KE-298) is administered orally by gastric intubation in a dose of 5 mg/kg once daily for 21 days. At 20 min, 24 h or 21 days after dosing with Esonarimod, the rats are anaesthetized with ether and blood samples are collected from the femoral aorta into heparinized containers. The liver, kidney, lung, aorta and skin are excised and weighed. Tissues (except aorta) are homogenized with ice-cold physiological saline to yield a 20% homogenate[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
순도&문서
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Inoue T, et al. KE-298 and its active metabolite KE-758 suppress nitric oxide production by murine macrophage cells and peritoneal cells from rats with adjuvant induced arthritis. J Rheumatol. 2001 Jun;28(6):1229-37. [Content Brief]
[2]. Hasegawa M, et al. Formation of a disulfide protein conjugate of the SH-group-containing metabolite (M-I) ofesonarimod (KE-298) and its elimination in rats. J Pharm Pharmacol. 2002 Apr;54(4):493-8. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.5671 mL | 17.8355 mL | 35.6710 mL | 89.1774 mL |
| 5 mM | 0.7134 mL | 3.5671 mL | 7.1342 mL | 17.8355 mL | |
| 10 mM | 0.3567 mL | 1.7835 mL | 3.5671 mL | 8.9177 mL | |
| 15 mM | 0.2378 mL | 1.1890 mL | 2.3781 mL | 5.9452 mL | |
| 20 mM | 0.1784 mL | 0.8918 mL | 1.7835 mL | 4.4589 mL | |
| 25 mM | 0.1427 mL | 0.7134 mL | 1.4268 mL | 3.5671 mL | |
| 30 mM | 0.1189 mL | 0.5945 mL | 1.1890 mL | 2.9726 mL | |
| 40 mM | 0.0892 mL | 0.4459 mL | 0.8918 mL | 2.2294 mL | |
| 50 mM | 0.0713 mL | 0.3567 mL | 0.7134 mL | 1.7835 mL | |
| 60 mM | 0.0595 mL | 0.2973 mL | 0.5945 mL | 1.4863 mL | |
| 80 mM | 0.0446 mL | 0.2229 mL | 0.4459 mL | 1.1147 mL | |
| 100 mM | 0.0357 mL | 0.1784 mL | 0.3567 mL | 0.8918 mL |