R112
Based on 1 Customer Validation
R112 is a fast and reversible inhibitor of spleen tyrosine kinase (Syk) kinase. R112 inhibits Syk kinase activity with an IC50 value of 226 nM and a Ki value of 96 nM. R112 inhibits IgE-FcεRI signaling pathway. R112 can be used for the research of allergic rhinitis.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 98.90%
- CAS No.: 575474-82-7
- 화학식: C16H13FN4O2
- 분자량:312.30
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- Protocol
- 순도&문서
- References
-
Help & FAQs
-
HY-13038A
FostamatinibSyk/FLT3 Inhibitor -
HY-12974
PRT-060318Syk Inhibitor -
HY-109091
LanraplenibSYK Inhibitor -
HY-15968
EntospletinibSyk Inhibitor -
HY-14985
BAY 61-3606 dihydrochlorideApoptosis Inducer -
HY-15322
PRT062607Syk Inhibitor -
HY-100867A
Mivavotinib monohydrochlorideSYK/FLT3 Inhibitor -
HY-12067
R406Syk/FLT3 Inhibitor -
HY-13518
PiceatannolSyk Inhibitor -
HY-13038
Fostamatinib DisodiumSyk/FLT3 Inhibitor -
HY-15323
PRT062607 HydrochlorideSyk Inhibitor -
HY-13038B
Fostamatinib disodium hexahydrateSyk/FLT3 Inhibitor
Biological Activity
제품 설명
IC50 & Target
IC50: 226 nM (Syk kinase)[1]
In Vitro
R112 (0.001-10 μM; 1 h) dose-dependently inhibits anti-IgE-mediated tryptase release and histamine release with EC50s of 0.353 and 0.28 μM, inhibits histamine release by basophils stimulated with an EC50 value of 0.49 μM, inhibits secretion of LTC4, TNF-α, GM-CSF and IL-8 with EC50s of 0.115, 2.01, 1.58 and 1.75 μM, respectively[1]. R112 (0-10 μM; 40 min) inhibits Syk target LAT (Y191) phosphorylation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Human mast cells
-
Concentration:0.4, 2 and 10 μM
-
Incubation Time:40 min
-
Result:Inhibited phosphorylation of the Syk target LAT (Y191) and also inhibited phosphorylation of Syk downstream events.
Chemical Information
-
CAS No. 575474-82-7
-
Appearance Solid
-
분자량 312.30
-
화학식 C16H13FN4O2
-
Color Light yellow to yellow
-
SMILES
FC1=CN=C(NC2=CC(O)=CC=C2)N=C1NC3=CC(O)=CC=C3
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
용액&용해도
In Vitro:
DMSO : 55 mg/mL (176.11 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.75 mg/mL (8.81 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.75 mg/mL (8.81 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (271 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2020 mL | 16.0102 mL | 32.0205 mL | 80.0512 mL |
| 5 mM | 0.6404 mL | 3.2020 mL | 6.4041 mL | 16.0102 mL | |
| 10 mM | 0.3202 mL | 1.6010 mL | 3.2020 mL | 8.0051 mL | |
| 15 mM | 0.2135 mL | 1.0673 mL | 2.1347 mL | 5.3367 mL | |
| 20 mM | 0.1601 mL | 0.8005 mL | 1.6010 mL | 4.0026 mL | |
| 25 mM | 0.1281 mL | 0.6404 mL | 1.2808 mL | 3.2020 mL | |
| 30 mM | 0.1067 mL | 0.5337 mL | 1.0673 mL | 2.6684 mL | |
| 40 mM | 0.0801 mL | 0.4003 mL | 0.8005 mL | 2.0013 mL | |
| 50 mM | 0.0640 mL | 0.3202 mL | 0.6404 mL | 1.6010 mL | |
| 60 mM | 0.0534 mL | 0.2668 mL | 0.5337 mL | 1.3342 mL | |
| 80 mM | 0.0400 mL | 0.2001 mL | 0.4003 mL | 1.0006 mL | |
| 100 mM | 0.0320 mL | 0.1601 mL | 0.3202 mL | 0.8005 mL |
R112 Related Classifications
HY-16420 Related Classifications
Powered by Bioz