(E)-Aztreonam
Based on 1 Customer Validation
(E)-Aztreonam (SQ-28429) is a monocyclic beta-lactam antibiotic. (E)-Aztreonam has the potential for the research of infections caused by gram-negative pathogens.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.68%
- CAS No.: 99341-02-3
- 화학식: C13H17N5O8S2
- 분자량:435.43
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
All Antibiotic Isoforms
More
Biological Activity
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:6-8 weeks, male BALB/c mice[3]
-
Dosage:7, 14, 28, 57 mg/kg
-
Administration:I.p.; daily for 7 days, 28 mg/kg daily for 14 days
-
Result:Increased every immune parameter treatment with 28 mg/kg per day of aztreonam over 14 days, treatment with 57 mg/kg per day of aztreonam for 7 days only enhanced the natural killer (NK) activity of splenocytes.
Chemical Information
-
CAS No. 99341-02-3
-
Appearance Solid
-
분자량 435.43
-
화학식 C13H17N5O8S2
-
Color White to off-white
-
SMILES
CC(C)(O/N=C(C1=CSC(N)=N1)/C(N[C@H]2[C@H](C)N(S(=O)(O)=O)C2=O)=O)C(O)=O
-
Synonyms
SQ-28429
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : ≥ 100 mg/mL (229.66 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.74 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.74 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2966 mL | 11.4829 mL | 22.9658 mL | 57.4145 mL |
| 5 mM | 0.4593 mL | 2.2966 mL | 4.5932 mL | 11.4829 mL | |
| 10 mM | 0.2297 mL | 1.1483 mL | 2.2966 mL | 5.7415 mL | |
| 15 mM | 0.1531 mL | 0.7655 mL | 1.5311 mL | 3.8276 mL | |
| 20 mM | 0.1148 mL | 0.5741 mL | 1.1483 mL | 2.8707 mL | |
| 25 mM | 0.0919 mL | 0.4593 mL | 0.9186 mL | 2.2966 mL | |
| 30 mM | 0.0766 mL | 0.3828 mL | 0.7655 mL | 1.9138 mL | |
| 40 mM | 0.0574 mL | 0.2871 mL | 0.5741 mL | 1.4354 mL | |
| 50 mM | 0.0459 mL | 0.2297 mL | 0.4593 mL | 1.1483 mL | |
| 60 mM | 0.0383 mL | 0.1914 mL | 0.3828 mL | 0.9569 mL | |
| 80 mM | 0.0287 mL | 0.1435 mL | 0.2871 mL | 0.7177 mL | |
| 100 mM | 0.0230 mL | 0.1148 mL | 0.2297 mL | 0.5741 mL |
Powered by Bioz