KPT-6566
Based on 1 publication(s) in Google Scholar
KPT-6566 is a selective and covalent prolyl isomerase PIN1 inhibitor, covalently binds to the catalytic site of PIN1, selectively inhibits and degrades PIN1. KPT-6566 shows an IC50 value of 640 nM and a Ki value of 625.2 nM for PIN1 PPIase domain. KPT-6566 can be used for the research of cancer.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.0%
- CAS No.: 881487-77-0
- 화학식: C22H21NO5S2
- 분자량:443.54
-
보관:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
Oxygen Sensing Compound Library
HY-L045
-
Glycolysis Compound Library
HY-L058
-
Cytoskeleton Compound Library
HY-L060
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Transcription Factor-Targeted Library
HY-L090
-
Glucose Metabolism Compound Library
HY-L092
-
Targeted Diversity Library
HY-L099
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
PI3K/Akt/mTOR Compound Library
HY-L015
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
Publications Citing Use of MedChemExpress (MCE) KPT-6566
More
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| MDA-MB-231 | IC50 |
1.2 μM
Compound: 42
|
Anticancer activity against human MDA-MB-231 cells assessed as cell growth inhibition measured after 24 hrs by tryphan blue staining based assay
Anticancer activity against human MDA-MB-231 cells assessed as cell growth inhibition measured after 24 hrs by tryphan blue staining based assay
|
[PMID: 37438908] |
KPT-6566 (1-5 μM; 0-8 d) inhibits WT fibroblasts proliferation[1]. KPT-6566 (0-10 μM; 48 h) inhibits normal breast epithelial cells and cancer cells viability via a PIN1-dependent manner[1]. KPT-6566 (0-10 μM; 48 h) affects hyperphosphorylated pRB level, Cyclin D1 and PIN1 concentration[1]. KPT-6566 (2.5-5 μM; 48 h) inhibits the mut-p53, NOTCH1 and NRF2 pathways[1]. KPT-6566 (0-5 μM; 48 h) induces DNA damage via a PIN1-dependent way[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Immortalized fibroblasts derived from WT and Pin1 KO mouse embryos
-
Concentration:1 and 5 μM
-
Incubation Time:0-8 days
-
Result:Dose-dependently inhibited proliferation of WT fibroblasts, while showed no effect on Pin1 KO fibroblasts.
-
Cell Line:MCF10A, HMEC, HeLa, LNCaP, SKOV-3, PANC-1, PC-3, MDA-MB-468 and MDA-MB-231 cells
-
Concentration:0-10 μM
-
Incubation Time:48 hours
-
Result:Inhibited normal breast epithelial cells and cancer cells viability even at a low concentration and increased the concentration of PIN1 in MDA-MB-468, SKOV-3, PC-3, LNCaP and PANC-1.
-
Cell Line:Immortalized fibroblasts derived from WT and Pin1 KO mouse embryos and PIN1 KO MDA-MB-231 cells
-
Concentration:0-10 μM
-
Incubation Time:48 hours
-
Result:Decreased hyperphosphorylated pRB and Cyclin D1 levels, dose- and time-dependently promoted degradation of PIN1 .
-
Cell Line:MDA-MB-231, MCF10A, MDA-MB-468 and MDA-MB-231 cells
-
Concentration:0, 2.5 and 5 μM
-
Incubation Time:48 hours
-
Result:Dose-dependently increased H2AX phosphorylation and caused H2AX phosphorylation in MCF10A, MDA-MB-468 and MDA-MB-231 cell lines. Increased H2AX phosphorylation while other inhibitors such as ATRA, PiB and Juglone disabled to induce H2AX phosphorylation at same concentration. Achieved DNA damage through formation of DNA adducts.
-
Cell Line:MDA-MB-231 cells
-
Concentration:2.5 and 5 μM
-
Incubation Time:48 hours
-
Result:Dose-dependently inhibitd the activation of mut-p53 and NOTCH1 pathways which are controlled by PIN1. Inhibitd the expression of cFOS HO1, NQO1, TXNRD1 and DNAJAB, and induced cellular responses to oxidative stress.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:6-week-old female mice with 1 million of MDA-MB-231Luc6 cells injection[1]
-
Dosage:5 mg/kg
-
Administration:Intraperitoneal injection; 5 mg/kg once a day; for 26 days
-
Result:Exibited no sign of local or systemic and organ toxicity by post mortem morphologic analyses.
Chemical Information
-
CAS No. 881487-77-0
-
Appearance Solid
-
분자량 443.54
-
화학식 C22H21NO5S2
-
Color White to yellow
-
SMILES
O=C(O)CSC(C1=O)=C/C(C2=C1C=CC=C2)=N\S(=O)(C3=CC=C(C(C)(C)C)C=C3)=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Cancer Res
The Prolyl Isomerase PIN1 Impacts Fibroblast Differentiation States and Crosstalk in Pancreatic Cancer. [Abstract]2025 Sep 18. PMID: 40966318
용액&용해도
DMSO : 19.23 mg/mL (43.36 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 1.92 mg/mL (4.33 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 1.92 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (19.2 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1 mg/mL (2.25 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (284 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2546 mL | 11.2729 mL | 22.5459 mL | 56.3647 mL |
| 5 mM | 0.4509 mL | 2.2546 mL | 4.5092 mL | 11.2729 mL | |
| 10 mM | 0.2255 mL | 1.1273 mL | 2.2546 mL | 5.6365 mL | |
| 15 mM | 0.1503 mL | 0.7515 mL | 1.5031 mL | 3.7576 mL | |
| 20 mM | 0.1127 mL | 0.5636 mL | 1.1273 mL | 2.8182 mL | |
| 25 mM | 0.0902 mL | 0.4509 mL | 0.9018 mL | 2.2546 mL | |
| 30 mM | 0.0752 mL | 0.3758 mL | 0.7515 mL | 1.8788 mL | |
| 40 mM | 0.0564 mL | 0.2818 mL | 0.5636 mL | 1.4091 mL |
KPT-6566 Related Classifications
HY-123847 Related Classifications
Powered by Bioz