N-Vanillyloctanamide
Based on 1 Customer Validation
N-Vanillyloctanamide is a capsaicinoid that has the activity of inhibiting the root growth of plant seedlings. N-Vanillyloctanamide significantly reduces the root length of Lactuca sativa (seedling) in a dose-dependent manner.
For research use only. We do not sell to patients.
- Purity: 99.10%
- CAS No.: 58493-47-3
- Formula: C16H25NO3
- Molecular Weight:279.37
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Chemical Information
-
CAS No. 58493-47-3
-
Appearance Solid
-
Molecular Weight 279.37
-
Formula C16H25NO3
-
Color White to off-white
-
SMILES
O=C(CCCCCCC)NCC1=CC=C(C(OC)=C1)O
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (357.95 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.95 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (265 KB)
-
SDS (558 KB)
- English - EN (558 KB)
- Français - FR (558 KB)
- Deutsch - DE (558 KB)
- Norwegian - NO (558 KB)
- Español - ES (558 KB)
- Swedish - SV (558 KB)
- Italian - IT (558 KB)
- Korean - KR (558 KB)
- Portuguese - PT (558 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.5795 mL | 17.8974 mL | 35.7948 mL | 89.4871 mL |
| 5 mM | 0.7159 mL | 3.5795 mL | 7.1590 mL | 17.8974 mL | |
| 10 mM | 0.3579 mL | 1.7897 mL | 3.5795 mL | 8.9487 mL | |
| 15 mM | 0.2386 mL | 1.1932 mL | 2.3863 mL | 5.9658 mL | |
| 20 mM | 0.1790 mL | 0.8949 mL | 1.7897 mL | 4.4744 mL | |
| 25 mM | 0.1432 mL | 0.7159 mL | 1.4318 mL | 3.5795 mL | |
| 30 mM | 0.1193 mL | 0.5966 mL | 1.1932 mL | 2.9829 mL | |
| 40 mM | 0.0895 mL | 0.4474 mL | 0.8949 mL | 2.2372 mL | |
| 50 mM | 0.0716 mL | 0.3579 mL | 0.7159 mL | 1.7897 mL | |
| 60 mM | 0.0597 mL | 0.2983 mL | 0.5966 mL | 1.4915 mL | |
| 80 mM | 0.0447 mL | 0.2237 mL | 0.4474 mL | 1.1186 mL | |
| 100 mM | 0.0358 mL | 0.1790 mL | 0.3579 mL | 0.8949 mL |
Powered by Bioz