SpiD3
Based on 1 Customer Validation
SpiD3, a spirocyclic dimer, is an anticancer agent. SpiD3 markedly inhibits malignant B-cell proliferation and suppressed NF-κB activation independent of TME-associated stimuli. SpiD3 induces apoptosis and inhibits protein synthesis in chronic lymphocytic leukemia cells. SpiD3 can be used for study of chronic lymphocytic leukemia (CLL).
For research use only. We do not sell to patients.
- Purity : 98.24%
- CAS No.: 3033533-25-1
- Formula: C27H22N2O6
- Molecular Weight:470.47
-
Storage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Biological Activity
Description
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A2780 | IC50 |
0.23 μM
Compound: SpiD3
|
Antiproliferative activity against human A2780 cells assessed as cell growth inhibition measured after 3 days by cell viability assay
Antiproliferative activity against human A2780 cells assessed as cell growth inhibition measured after 3 days by cell viability assay
|
[PMID: 35367592] |
| CCRF-CEM | GI50 |
0.38 μM
Compound: SpiD3
|
Antiproliferative activity against human CCRF-CEM cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human CCRF-CEM cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| HL-60(TB) | GI50 |
0.38 μM
Compound: SpiD3
|
Antiproliferative activity against human HL-60(TB) cells assessed as reduction in the net protein increase inhibition by SRB assay
Antiproliferative activity against human HL-60(TB) cells assessed as reduction in the net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| K562 | GI50 |
0.38 μM
Compound: SpiD3
|
Antiproliferative activity against human K562 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human K562 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| MIA PaCa-2 | IC50 |
0.13 μM
Compound: SpiD3
|
Antiproliferative activity against human MIA PaCa-2 cells assessed as cell growth inhibition measured after 3 days by cell viability assay
Antiproliferative activity against human MIA PaCa-2 cells assessed as cell growth inhibition measured after 3 days by cell viability assay
|
[PMID: 35367592] |
| MOLT-4 | GI50 |
0.38 μM
Compound: SpiD3
|
Antiproliferative activity against human MOLT-4 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human MOLT-4 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| OVCAR-5 | IC50 |
0.09 μM
Compound: SpiD3
|
Antiproliferative activity against human OVCAR-5 cells assessed as cell growth inhibition measured after 3 days by cell viability assay
Antiproliferative activity against human OVCAR-5 cells assessed as cell growth inhibition measured after 3 days by cell viability assay
|
[PMID: 35367592] |
| RPMI-8226 | GI50 |
0.38 μM
Compound: SpiD3
|
Antiproliferative activity against human RPMI-8226 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human RPMI-8226 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| SF-268 | GI50 |
1.76 μM
Compound: SpiD3
|
Antiproliferative activity against human SF-268 cells assessed as reduction in the net protein increase inhibition by SRB assay
Antiproliferative activity against human SF-268 cells assessed as reduction in the net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| SF-295 | GI50 |
1.76 μM
Compound: SpiD3
|
Antiproliferative activity against human SF-295 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human SF-295 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| SF-539 | GI50 |
1.76 μM
Compound: SpiD3
|
Antiproliferative activity against human SF-539 cells assessed as reduction in the net protein increase inhibition by SRB assay
Antiproliferative activity against human SF-539 cells assessed as reduction in the net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| SNB-19 | GI50 |
1.76 μM
Compound: SpiD3
|
Antiproliferative activity against human SNB-19 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human SNB-19 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| SNB-75 | GI50 |
1.76 μM
Compound: SpiD3
|
Antiproliferative activity against human SNB-75 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human SNB-75 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| SR | GI50 |
0.38 μM
Compound: SpiD3
|
Antiproliferative activity against human SR cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human SR cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
| U-251 | GI50 |
1.76 μM
Compound: SpiD3
|
Antiproliferative activity against human U-251 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
Antiproliferative activity against human U-251 cells assessed as cell growth inhibition by measuring reduction in net protein increase inhibition by SRB assay
|
[PMID: 35367592] |
In Vitro
SpiD3 (0.01-100 µM; 72 h) shows antiproliferative properties in CLL cell lines[1].
SpiD3 (0.25-1 µM; 24 h) induces apoptosis in CLL cell lines[1].
SpiD3 (0.25-1 µM; 48 h) causes CLL cells to accumulate in the G0-G1 phase, and the number of cells in the G2-M phase decreases accordingly[1].
SpiD3 (0.5-2 µM; 4 h) induces the unfolded protein response (UPR) and inhibits protein translation in CLL cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
-
Cell Line:HG-3 cells, OSU-CLL cells ,TP53 mutant MEC1 and MEC2 CLL cells, and aggressive mantle cell lymphoma and double-hit/triple-hit (DH/TH) lymphoma B cells
-
Concentration:0.01 µM, 0.1 µM, 1 µM, 10 µM, 100 µM
-
Incubation Time:72 h
-
Result:Showed IC50 values of 0.12 µM, 0.33 µM, 0.41 µM, 0.55 µM, and < 0.9 µM against HG-3 cells, OSU-CLL, MEC1, MEC2 and DH/TH lymphoma B cells, respectively.
-
Cell Line:HG-3 cells, OSU-CLL cells
-
Concentration:0.25 μM, 0.5 μM, 1 μM
-
Incubation Time:24 h
-
Result:Induced apoptosis as indicated by increased Annexin V+ cells and PARP cleavage.
-
Cell Line:OSU-CLL cells
-
Concentration:0.25 μM, 0.5 μM, 1 μM
-
Incubation Time:48 h
-
Result:Accumulated in the G0-G1-phase with a corresponding reduction in the G2-M population.
-
Cell Line:HG-3 cells, OSU-CLL cells
-
Concentration:0.5 μM, 1 μM, 2 μM
-
Incubation Time:4 h
-
Result:Inhibited eIF2α phosphorylation and 4E-BP1 phosphorylation at Ser56.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male and female Eµ-TCL1 (background: C57BL/6J) transgenic mice (10.2 months) with evident leukemia in the blood[1].
-
Dosage:10 mg/kg (prodrug of SpiD3 (dimethylamino prodrug)
-
Administration:Tail vein intravenous injection; daily; for 3 days
-
Result:Resulted in a significant decrease in leukemia burden in the blood and spleen.
Chemical Information
-
CAS No. 3033533-25-1
-
Appearance Solid
-
Molecular Weight 470.47
-
Formula C27H22N2O6
-
Color White to off-white
-
SMILES
O=C1OC2(CC1=C)C(N(CCCN3C(C4(C5=C3C=CC=C5)OC(C(C4)=C)=O)=O)C6=C2C=CC=C6)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
In Vitro:
DMSO : 25 mg/mL (53.14 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.31 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocols
-
Annexin V plus membrane-impermeant dye apoptosis staining
Annexin V-based apoptosis assays rely on the detection of phosphatidylserine (PS) externalization from the inner leaflet of the plasma membrane to the outer leaflet, an early biochemical hallmark of apoptosis. Fluorescently labeled Annexin V binds PS in a calcium-dependent manner, enabling identification of early apoptotic cells by flow cytometry or fluorescence microscopy. When combined with a membrane-impermeant DNA-binding dye (e. g. , propidium iodide), this approach allows discrimination between viable (Annexin V−/dye−), early apoptotic (Annexin V+/dye−), and late apoptotic or necrotic (Annexin V+/dye+) cell populations by assessing membrane integrity and PS exposure.
-
BrdU Incorporation Assay
Bromodeoxyuridine (BrdU) incorporation assay is based on the principle that BrdU, a thymidine analog, is incorporated into newly synthesized DNA during the S phase of the cell cycle, thereby serving as a marker of DNA replication and cellular proliferation. Incorporated BrdU can be detected using anti-BrdU antibodies following DNA denaturation, enabling visualization or quantification of proliferating cells through immunochemical detection methods such as immunofluorescence or immunohistochemistry.
-
Somatic Cell Culture
A method of simulating the in vivo environment in vitro to maintain the cell growth, differentation and main functions.
-
CFSE Dye Dilution Proliferation Assay
The CFSE (carboxyfluorescein diacetate succinimidyl ester) dye dilution proliferation assay is based on the covalent labeling of intracellular proteins by a cell-permeant fluorescent dye that becomes fluorescent upon intracellular ester cleavage and then is stably retained within cells. As labeled cells divide, the dye is partitioned equally between daughter cells, resulting in a stepwise halving of fluorescence intensity that can be quantified by flow cytometry to determine the number of cell divisions undergone by each cell population. This fluorescence dilution approach enables quantitative tracking of lymphocyte proliferation at the single-cell level over multiple rounds of division. CFSE-based proliferation analysis has been widely applied to measure antigen-driven lymphocyte expansion in vitro, where discrete fluorescence peaks correspond to successive cell divisions and allow reconstruction of proliferative history within heterogeneous populations.
-
Dye-dilution cell tracking and proliferation staining
Dye-dilution cell tracking assays quantify cell proliferation by covalently labeling intracellular proteins with a stable fluorescent dye that is equally partitioned between daughter cells during mitosis, resulting in stepwise halving of fluorescence intensity with each cell division as measured by flow cytometry histograms. Carboxyfluorescein diacetate succinimidyl ester (CFSE) is a prototypical dye that diffuses into cells, is enzymatically converted into a fluorescent compound, and then covalently binds intracellular amine groups, producing long-lived fluorescence suitable for tracking multiple rounds of division in vitro and in vivo. Successive generations of dividing cells form discrete peaks of decreasing fluorescence intensity, enabling estimation of proliferation history, precursor frequency, and division index within heterogeneous populations. Alternative dyes such as CellTrace Violet (CTV) and far-red membrane dyes (e. g. , PKH26) follow the same dilution principle but differ
-
CCK-8/WST-8 Cell Proliferation Assay
The CCK-8/WST-8 assay is based on the reduction of the water-soluble tetrazolium salt WST-8 to a water-soluble formazan product by cellular dehydrogenases in metabolically active cells, where the generated formazan amount is proportional to the number of living cells and is quantified by measuring absorbance in the visible range, providing a colorimetric readout for cell viability and proliferation assessment. This class of tetrazolium-based assays improves upon earlier MTT-based systems by producing a water-soluble formazan, eliminating the need for organic solubilization steps and enabling direct spectrophotometric measurement in culture medium.
-
Protocol for Cell Cycle
Cell-cycle analysis by flow cytometry measures DNA content in single cells to estimate the fraction of cells in G0/G1, S, and G2/M phases. Propidium iodide intercalates into DNA, and after RNA removal with RNase, fluorescence intensity reflects cellular DNA content: 2N cells are assigned to G0/G1, cells between 2N and 4N to S phase, and 4N cells to G2/M. DNA-content analysis alone cannot reliably separate G0 from G1 or G2 from M. Ki-67 can distinguish quiescent G0 cells from cycling cells, EdU or BrdU incorporation marks active DNA synthesis in S phase, and phospho-histone H3 staining identifies mitotic cells within the 4N population.
-
Cell Counting-Based Growth Curve Assay
Cell counting-based growth curve assays quantify cell proliferation by directly measuring changes in viable cell number over time using manual or automated counting methods such as hemocytometer-based counting or instrument-assisted cell enumeration, enabling construction of growth curves that reflect population expansion dynamics in response to culture conditions. A widely used approach is trypan blue exclusion with hemocytometer counting, where membrane-compromised (non-viable) cells take up the dye, allowing discrimination between viable and non-viable cells while simultaneously enabling total cell number quantification. Repeated sampling across time points allows estimation of proliferation rate, growth phases, and comparative growth kinetics between experimental conditions.
-
Research Protocol for Inflammation-related Diseases
The NLRP3 inflammasome is a cytosolic innate immune signaling platform that integrates priming signals and danger-signal activation to promote caspase-1 activation, maturation of IL-1β and IL-18, and gasdermin D-mediated pyroptotic cell death. The core experimental logic is to determine whether inflammatory disease phenotypes are driven by increased NLRP3 expression, ASC-containing inflammasome assembly, caspase-1 cleavage, GSDMD cleavage, and extracellular release of IL-1β/IL-18 rather than by nonspecific cell injury alone. The pathway is strongly linked to inflammation-related disease phenotypes because monosodium urate crystals activate NALP3/NLRP3 inflammasome signaling in gout-like crystal inflammation, cholesterol crystals activate NLRP3 inflammasomes in atherogenesis models, and DSS-induced intestinal inflammation has been reported to involve NLRP3 inflammasome activity. However, experimental colitis studies also show context-dependent protective effects of NLRP3 inflammasome co
-
Colony Formation (Clonogenic) Assay
The clonogenic (colony formation) assay measures the ability of a single cell to retain reproductive viability and form a macroscopic colony, typically defined as a cluster derived from one progenitor cell after a defined growth period. This assay is widely used to evaluate cell survival after exposure to ionizing radiation or cytotoxic treatments and is considered a standard method in radiation biology for generating dose-response relationships of reproductive cell death. Colony formation reflects long-term proliferative capacity rather than short-term metabolic activity, and survival is quantified by comparing treated versus untreated conditions based on colony number and derived survival fractions.
-
Cell Viability Determination by MTT Colorimetric Assay
The following protocol uses the MTT colorimetric assay as a classic literature-established method for assessing cell viability/metabolic activity in cultured mammalian cells. MTT[3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] is reduced by metabolically active cells to a colored formazan product; the amount of formazan is quantified spectrophotometrically and provides an indirect measure of metabolically active viable cells. Importantly, MTT reduction reflects cellular oxidoreductase/metabolic activity rather than an absolute direct count of living cells, so changes in cellular metabolism can alter the signal independently of cell number.
-
EdU Incorporation Assay (Click Chemistry-Based DNA Synthesis Measurement)
The EdU incorporation assay measures DNA synthesis by adding the thymidine analog 5-ethynyl-2′-deoxyuridine to cells or tissues, where it is incorporated into newly synthesized DNA during S phase. Incorporated EdU is detected by copper-catalyzed azide-alkyne cycloaddition, in which a fluorescent azide covalently reacts with the ethynyl group on EdU, allowing S-phase cells to be detected by fluorescence microscopy, flow cytometry, or high-content imaging. EdU detection does not require DNA denaturation or anti-BrdU antibody access, which preserves sample structure and improves compatibility with immunostaining and multiparameter cytometry compared with BrdU-based detection. EdU can be cytotoxic in a cell-type- and exposure-dependent manner, so pulse duration, concentration, and continuous-labeling designs should be validated for each cell type.
-
Ki-67 Immunostaining Proliferation Assay
Ki-67 immunostaining measures the growth fraction of a cell population by detecting Ki-67, a nuclear antigen present in proliferating cells and absent in quiescent G0 cells. The readout is the percentage of Ki-67-positive nuclei among total counted cells, commonly called the Ki-67 labeling index or proliferation index.
-
Apoptosis
Apoptosis, also called programmed cell death, is generally characterized by distinct morphological characteristics.
-
TUNEL staining for apoptotic DNA fragmentation
TUNEL staining detects DNA strand breaks by using terminal deoxynucleotidyl transferase to add labeled nucleotides to exposed 3′-OH DNA termini, generating either microscopic staining in fixed cells or tissue sections, or fluorescence/cytometric signal in cell suspensions. TUNEL positivity reflects DNA fragmentation but should not be interpreted alone as definitive apoptosis, because TUNEL can also label necrotic, autolytic, mechanically damaged, or DNA-repair-associated DNA breaks.
-
PCNA Immunodetection Proliferation Assay
PCNA immunodetection measures proliferative activity by detecting proliferating cell nuclear antigen, a nuclear protein associated with DNA polymerase δ function and DNA replication. The assay readout is the proportion of PCNA-positive nuclei among total counted cells, but PCNA labeling is not identical to BrdU labeling because PCNA can mark late G1/early S-associated replication competence and may persist beyond active DNA synthesis depending on fixation and extraction conditions.
-
Protocol for Cell Counting and Cell Density Analysis
Cell counting and cell-density analysis estimate the number of cells in a known volume or field area. Manual hemocytometer counting uses a chamber of defined geometry to convert counted cells into cells/mL, while automated counters and image-analysis workflows detect cell objects from optical, brightfield, fluorescence, impedance, or digital-image features. Trypan blue viability counting is based on dye exclusion: viable cells with intact membranes exclude dye, while non-viable cells with compromised membranes stain blue. The readout is total cell density, viable-cell density, dead-cell density, and percent viability. Cell density can also be estimated from microscopy images by counting objects per image area, from flow cytometry using calibrated volume or reference particles, or from in situ microscopy in bioreactors after calibration against reference methods such as hemocytometer or flow cytometry.
-
Apoptosis Solutions
Apoptosis is a regulated, generally non-lytic cell-death pathway that removes unwanted, damaged, infected, or abnormal cells through coordinated morphological changes, caspase activation, DNA fragmentation, and membrane remodeling. The intrinsic apoptosis pathway is controlled mainly by mitochondrial outer membrane permeabilization, BCL-2 family proteins, cytochrome c release, apoptosome formation, caspase-9 activation, and downstream executioner caspase-3/7 activation. The extrinsic apoptosis pathway is initiated by death receptors such as Fas, TNFR, and TRAIL receptors, which recruit adaptor proteins and activate caspase-8 before engaging executioner caspases or mitochondrial amplification through BID cleavage. Apoptosis is linked to many phenotypes, including cancer cell killing, tissue homeostasis, immune regulation, neurodegeneration, infection response, and treatment-induced cytotoxicity; unresolved questions include how apoptosis interacts with necroptosis, pyroptosis, ferroptos
-
MTT Cell Proliferation Assay
The MTT assay is a colorimetric endpoint assay for estimating viable cell number, cell growth, cytotoxicity, or cell activation in cultured mammalian cells. Living cells reduce the yellow tetrazolium salt MTT into purple/blue formazan, while dead cells do not generate the same signal; the resulting color can be quantified with a multiwell spectrophotometer. MTT reduction is commonly interpreted as a readout of metabolic activity that often correlates with viable cell number, but it should not be treated as a direct cell-counting method unless the assay is optimized for the cell type and experimental condition. Studies show that MTT reduction can involve mitochondrial and non-mitochondrial reducing systems, and formazan may accumulate in intracellular lipid droplets rather than simply marking mitochondria.
Purity & Documentation
-
Data Sheet (282 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1255 mL | 10.6277 mL | 21.2553 mL | 53.1384 mL |
| 5 mM | 0.4251 mL | 2.1255 mL | 4.2511 mL | 10.6277 mL | |
| 10 mM | 0.2126 mL | 1.0628 mL | 2.1255 mL | 5.3138 mL | |
| 15 mM | 0.1417 mL | 0.7085 mL | 1.4170 mL | 3.5426 mL | |
| 20 mM | 0.1063 mL | 0.5314 mL | 1.0628 mL | 2.6569 mL | |
| 25 mM | 0.0850 mL | 0.4251 mL | 0.8502 mL | 2.1255 mL | |
| 30 mM | 0.0709 mL | 0.3543 mL | 0.7085 mL | 1.7713 mL | |
| 40 mM | 0.0531 mL | 0.2657 mL | 0.5314 mL | 1.3285 mL | |
| 50 mM | 0.0425 mL | 0.2126 mL | 0.4251 mL | 1.0628 mL |