SHMT-IN-2
Based on 1 Customer Validation
SHMT-IN-2 is a stereo specific inhibitor of human SHMT1/2 with IC50 values of 13 nM and 66 nM for SHMT1 and SHMT2, respectively. SHMT-IN-2 can block the growth of many human cancer cells, and has sensitivity for B-cell lymphomas.
For research use only. We do not sell to patients.
- Purity: 99.60%
- CAS No.: 2102681-49-0
- Formula: C22H24F3N5O
- Molecular Weight:431.45
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
Anti-Cancer Compound Library
HY-L025
-
Endocrinology Compound Library
HY-L047
-
Anti-Blood Cancer Compound Library
HY-L079
-
Heterocyclic Compound Library
HY-L138
-
Highly Selective Inhibitors Library
HY-L158
-
Anti-Hematopathy Compound Library
HY-L171
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
IC50: 2800 nM (SHMT1); IC50: 36 nM (SHMT2) [1]
SHMT-IN-2 (compound 2) can inhibit cell growth with cellular IC50 values of 2800 nM and 36 nM for SHMT1 and SHMT2, respectively[1].
SHMT-IN-2 (30 μM) shows the growth sensitivity with the median IC50 was 4 μM to a panel of nearly 300 human cancer cell lines (with IC50 values of 1.72 μM and 1.73 μM for CCRF-CEM and HT,respectively), cell lines of B-cell lymphoma origin were enriched in the more sensitive half of cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2102681-49-0
-
Appearance Solid
-
Molecular Weight 431.45
-
Formula C22H24F3N5O
-
Color White to off-white
-
SMILES
NC1=C(C#N)C(C2=CC(N3CCCC3)=CC(C(F)(F)F)=C2)(C(C)C)C(C(C)=NN4)=C4O1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 100 mg/mL (231.78 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.79 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3178 mL | 11.5888 mL | 23.1777 mL | 57.9441 mL |
| 5 mM | 0.4636 mL | 2.3178 mL | 4.6355 mL | 11.5888 mL | |
| 10 mM | 0.2318 mL | 1.1589 mL | 2.3178 mL | 5.7944 mL | |
| 15 mM | 0.1545 mL | 0.7726 mL | 1.5452 mL | 3.8629 mL | |
| 20 mM | 0.1159 mL | 0.5794 mL | 1.1589 mL | 2.8972 mL | |
| 25 mM | 0.0927 mL | 0.4636 mL | 0.9271 mL | 2.3178 mL | |
| 30 mM | 0.0773 mL | 0.3863 mL | 0.7726 mL | 1.9315 mL | |
| 40 mM | 0.0579 mL | 0.2897 mL | 0.5794 mL | 1.4486 mL | |
| 50 mM | 0.0464 mL | 0.2318 mL | 0.4636 mL | 1.1589 mL | |
| 60 mM | 0.0386 mL | 0.1931 mL | 0.3863 mL | 0.9657 mL | |
| 80 mM | 0.0290 mL | 0.1449 mL | 0.2897 mL | 0.7243 mL | |
| 100 mM | 0.0232 mL | 0.1159 mL | 0.2318 mL | 0.5794 mL |
SHMT-IN-2 Related Classifications
HY-129226 Related Classifications
Powered by Bioz