Thalidomide-O-C8-COOH
Based on 1 Customer Validation
Thalidomide-O-C8-COOH is the Thalidomide-based Cereblon ligand used in the recruitment of CRBN protein. Thalidomide-O-C8-COOH (Cereblon ligand 3) can be connected to the ligand for protein by a linker to form PROTACs.
For research use only. We do not sell to patients.
- Purity: 96.94%
- CAS No.: 2225148-51-4
- Formula: C22H26N2O7
- Molecular Weight:430.45
-
Storage:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
All E3 Ligase Ligand-Linker Conjugates Isoforms
More
Biological Activity
|
Cereblon |
Chemical Information
-
CAS No. 2225148-51-4
-
Appearance Solid
-
Molecular Weight 430.45
-
Formula C22H26N2O7
-
Color White to off-white
-
SMILES
O=C(O)CCCCCCCCOC1=CC=CC(C(N2C(CC3)C(NC3=O)=O)=O)=C1C2=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 140 mg/mL (325.24 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 3.5 mg/mL (8.13 mM); Clear solution
This protocol yields a clear solution of ≥ 3.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (35.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3232 mL | 11.6158 mL | 23.2315 mL | 58.0788 mL |
| 5 mM | 0.4646 mL | 2.3232 mL | 4.6463 mL | 11.6158 mL | |
| 10 mM | 0.2323 mL | 1.1616 mL | 2.3232 mL | 5.8079 mL | |
| 15 mM | 0.1549 mL | 0.7744 mL | 1.5488 mL | 3.8719 mL | |
| 20 mM | 0.1162 mL | 0.5808 mL | 1.1616 mL | 2.9039 mL | |
| 25 mM | 0.0929 mL | 0.4646 mL | 0.9293 mL | 2.3232 mL | |
| 30 mM | 0.0774 mL | 0.3872 mL | 0.7744 mL | 1.9360 mL | |
| 40 mM | 0.0581 mL | 0.2904 mL | 0.5808 mL | 1.4520 mL | |
| 50 mM | 0.0465 mL | 0.2323 mL | 0.4646 mL | 1.1616 mL | |
| 60 mM | 0.0387 mL | 0.1936 mL | 0.3872 mL | 0.9680 mL | |
| 80 mM | 0.0290 mL | 0.1452 mL | 0.2904 mL | 0.7260 mL | |
| 100 mM | 0.0232 mL | 0.1162 mL | 0.2323 mL | 0.5808 mL |