Rislenemdaz
Based on 1 Customer Validation
Rislenemdaz (CERC-301) is an orally bioavailable and selective N-methyl-D-aspartate (NMDA) receptor subunit 2B (GluN2B) antagonist with Ki and IC 50 of 8.1 nM and 3.6 nM, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.86%
- CAS No.: 808732-98-1
- Formule: C19H23FN4O2
- Masse moléculaire:358.41
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Anti-Alzheimer's Disease Compound Library
HY-L069
-
Neuroprotective Compound Library
HY-L070
-
Anti-Parkinson's Disease Compound Library
HY-L085
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
Antidepressant Compound Library
HY-L108
-
Human Metabolite Library
HY-L123
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Inhibitors Library
HY-L158
-
Ion Channel Compound Library
HY-L166
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Membrane Transporter/Ion Channel Compound Library
HY-L011
-
Neuronal Signaling Compound Library
HY-L013
-
Clinical Compound Library
HY-L026
-
Drug Repurposing Compound Library
HY-L035
Voir tous les produits spécifiques à Isoform iGluR
More
Activité biologique
Rislenemdaz (CERC-301) inhibits calcium influx into agonist-stimulating NMDA-GluN1a/GluN2B L(tk-) cells with an IC50 of 3.6 nM. Rislenemdaz exhibits at least 1000× selectivity for the GluN2B receptor versus all targets tested, including the hERG potassium channel. Rislenemdaz also exhibits minimal activity against sigma-type receptors at 10 uM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 808732-98-1
-
Appearance Solid
-
Masse moléculaire 358.41
-
Formule C19H23FN4O2
-
Color White to off-white
-
SMILES
O=C(N1C[C@@H](F)[C@@H](CNC2=NC=CC=N2)CC1)OCC3=CC=C(C)C=C3
-
Synonyms
MK-0657; CERC-301
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (279.01 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.98 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.98 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Rat, dog, rhesus monkey, and human plasma samples (3 mL, N=3) are incubated with 2 and 20 uM [14C] Rislenemdaz at 37°C for 30 min in a shaking water bath. Following incubation, standard ultracentrifugation methodology is used to determine the percentage of drug unbind[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Four groups of 24 rats (12/sex) are given single doses of vehicle (0.5% methylcellulose [MC] and 0.02% sodium lauryl sulfate [SLS] in deionized water) or Rislenemdaz at 10, 30 or 100 mg/kg by oral gavage at a dose volume of 10 mL/kg. Three additional groups of rats (four males and three females per group) are orally dosed in the same manner with Rislenemdaz, and 24h serial blood samples are obtained and analyzed for Rislenemdaz plasma concentrations and evaluated for systemic exposure. Young, adult, male rats are randomly assigned across the treatment groups and are administered vehicle (0.5% MC/0.02% SLS), the reference compound desipramine (20 mg/kg; a tricyclic antidepressant) dissolving in sterile water, or Rislenemdaz (0.1, 0.3, 1, 3, 10, and 30 mg/kg) suspending in 0.5% MC/0.02% SLS, twice on Day 1 (after habituation; ~24 h prior to test, and prior to dark cycle) and once on Day 2 (30 min pretest for desipramine and 45 min pretest for Rislenemdaz and vehicle)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7901 mL | 13.9505 mL | 27.9010 mL | 69.7525 mL |
| 5 mM | 0.5580 mL | 2.7901 mL | 5.5802 mL | 13.9505 mL | |
| 10 mM | 0.2790 mL | 1.3951 mL | 2.7901 mL | 6.9753 mL | |
| 15 mM | 0.1860 mL | 0.9300 mL | 1.8601 mL | 4.6502 mL | |
| 20 mM | 0.1395 mL | 0.6975 mL | 1.3951 mL | 3.4876 mL | |
| 25 mM | 0.1116 mL | 0.5580 mL | 1.1160 mL | 2.7901 mL | |
| 30 mM | 0.0930 mL | 0.4650 mL | 0.9300 mL | 2.3251 mL | |
| 40 mM | 0.0698 mL | 0.3488 mL | 0.6975 mL | 1.7438 mL | |
| 50 mM | 0.0558 mL | 0.2790 mL | 0.5580 mL | 1.3951 mL | |
| 60 mM | 0.0465 mL | 0.2325 mL | 0.4650 mL | 1.1625 mL | |
| 80 mM | 0.0349 mL | 0.1744 mL | 0.3488 mL | 0.8719 mL | |
| 100 mM | 0.0279 mL | 0.1395 mL | 0.2790 mL | 0.6975 mL |
Rislenemdaz Related Classifications
HY-106441A Related Classifications
Powered by Bioz