Suplatast (Tosilate)
Based on 1 publication(s) in Google Scholar
Suplatast Tosilate (IPD 1151T) is an orally active Th2 cytokine inhibitor which can inhibit both IL-4 and IL-5 production from Th2 cells and suppress IgE synthesis. Suplatast Tosilate is an anti-allergic agent. Suplatast Tosilate has antiasthmatic, anti-inflammatory and antifibrotic activity.
For research use only. We do not sell to patients.
- Purity: 99.67%
- CAS No.: 94055-76-2
- Formula: C23H33NO7S2
- Molecular Weight:499.64
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) Suplatast (Tosilate)
More
Biological Activity
|
IL-4 |
IL-2 |
IL-5 |
IL-13 |
IPD-1151T (1-10 μM; 10 d) induces a concentration-dependent suppression of purified allergen (Cry j 1)-dependent IgE synthesis in autologous B cell cultures mediated by SN-4, without significantly affecting the IgG synthesis[1].
IPD-1151T (1-10 μM; 24 h) clearly depresses phytohemagglutinin (PHA)-induced expression of IL-4 mRNA in normal peripheral blood mononuclear cells (PBMC)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Suplatast Tosilate (100 μg/kg; once daily for 14 d) strongly suppresses immunoglobulin E contents in serum[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female BALB/c mice (6-8 weeks old) are immunized with ovalbumin[3]
-
Dosage:100 mg/kg
-
Administration:P.o. once a day for 21 days
-
Result:Reduced the number of total cells and eosinophils.
Almost completely inhibited the development of antigen-induced bronchial hyperresponsiveness (BHR).
Decreased the levels of IL-4, IL-5 and IL-13.
Chemical Information
-
CAS No. 94055-76-2
-
Appearance Solid
-
Molecular Weight 499.64
-
Formula C23H33NO7S2
-
Color White to off-white
-
SMILES
C[S+](C)CCC(NC1=CC=C(C=C1)OCC(COCC)O)=O.CC2=CC=C(C=C2)S(=O)([O-])=O
-
Synonyms
IPD 1151T
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvent & Solubility
H2O : ≥ 100 mg/mL (200.14 mM)
DMSO : ≥ 33 mg/mL (66.05 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.00 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.00 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Yanagihara Y, et, al. Suppression of IgE production by IPD-1151T (suplatast tosilate), a new dimethylsulfonium agent: (2). Regulation of human IgE response. Jpn J Pharmacol. 1993 Jan;61(1):31-9. [Content Brief]
[2]. Zhao GD, et, al. Effect of suplatast tosilate (IPD-1151T) on a mouse model of asthma: inhibition of eosinophilic inflammation and bronchial hyperresponsiveness. Int Arch Allergy Immunol. 2000 Feb;121(2):116-22. [Content Brief]
[3]. Kurokawa M, et, al. Suppressive effects of anti-allergic agent suplatast tosilate (IPD-1151T) on the expression of co-stimulatory molecules on mouse splenocytes in vivo. Mediators Inflamm. 2001 Dec;10(6):333-7. [Content Brief]
[4]. Furonaka M, Hattori N, Tanimoto T, Senoo T, Ishikawa N, Fujitaka K, Haruta Y, Yokoyama A, Kohno N. Suplatast tosilate prevents bleomycin-induced pulmonary fibrosis in mice. J Pharmacol Exp Ther. 2009 Jan;328(1):55-61. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 2.0014 mL | 10.0072 mL | 20.0144 mL | 50.0360 mL |
| 5 mM | 0.4003 mL | 2.0014 mL | 4.0029 mL | 10.0072 mL | |
| 10 mM | 0.2001 mL | 1.0007 mL | 2.0014 mL | 5.0036 mL | |
| 15 mM | 0.1334 mL | 0.6671 mL | 1.3343 mL | 3.3357 mL | |
| 20 mM | 0.1001 mL | 0.5004 mL | 1.0007 mL | 2.5018 mL | |
| 25 mM | 0.0801 mL | 0.4003 mL | 0.8006 mL | 2.0014 mL | |
| 30 mM | 0.0667 mL | 0.3336 mL | 0.6671 mL | 1.6679 mL | |
| 40 mM | 0.0500 mL | 0.2502 mL | 0.5004 mL | 1.2509 mL | |
| 50 mM | 0.0400 mL | 0.2001 mL | 0.4003 mL | 1.0007 mL | |
| 60 mM | 0.0334 mL | 0.1668 mL | 0.3336 mL | 0.8339 mL | |
| H2O | 80 mM | 0.0250 mL | 0.1251 mL | 0.2502 mL | 0.6255 mL |
| 100 mM | 0.0200 mL | 0.1001 mL | 0.2001 mL | 0.5004 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.