Relutrigine
Based on 1 Customer Validation
Relutrigine (PRAX-562) is an orally active inhibitor of persistent sodium channel. Relutrigine potently and preferentially inhibits persistent INa induced by ATX-II (Nav 1.5 activator) or the SCN8A mutation N1768D with IC50 values of 141 nM and 75 nM, respectively. Relutrigine exhibits potent use-dependent block and reduces neuronal intrinsic excitability. Relutrigine has effective anticonvulsant activity.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.33%
- CAS. Nr.: 2392951-29-8
- Formel: C15H11F6N5O2
- Molecular Weight:407.27
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Relutrigine (0.001-10000 µM) has a stronger inhibitory effect on hNaV1.6 sustained sodium channel (INa) when compared with targeted antiepileptic drugs Carbamazepine (HY-B0246) and Lamotrigine (HY-B0495). Relutrigine shows preference for persistent INa. Relutrigine (0.3 µM) significantly reduces the intrinsic excitability of wild-type CA1 pyramidal neurons[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male CD-1 mice (~35 g; MES)[1].
-
Dosage:0.3, 1, 3, 10, 20 and 40 mg/kg.
-
Administration:Oral gavage; single dose.
-
Result:Showed full anticonvulsant efficacy without affecting locomotor activity.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 2392951-29-8
-
Appearance Solid
-
Molecular Weight 407.27
-
Formel C15H11F6N5O2
-
Color White to light yellow
-
SMILES
FC1=C(OCC(F)(F)F)N=CC(C2=CN3C(C(F)(OCC)F)=NN=C3C=N2)=C1
-
Synonyms
PRAX-562
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (245.54 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (6.14 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4554 mL | 12.2769 mL | 24.5537 mL | 61.3843 mL |
| 5 mM | 0.4911 mL | 2.4554 mL | 4.9107 mL | 12.2769 mL | |
| 10 mM | 0.2455 mL | 1.2277 mL | 2.4554 mL | 6.1384 mL | |
| 15 mM | 0.1637 mL | 0.8185 mL | 1.6369 mL | 4.0923 mL | |
| 20 mM | 0.1228 mL | 0.6138 mL | 1.2277 mL | 3.0692 mL | |
| 25 mM | 0.0982 mL | 0.4911 mL | 0.9821 mL | 2.4554 mL | |
| 30 mM | 0.0818 mL | 0.4092 mL | 0.8185 mL | 2.0461 mL | |
| 40 mM | 0.0614 mL | 0.3069 mL | 0.6138 mL | 1.5346 mL | |
| 50 mM | 0.0491 mL | 0.2455 mL | 0.4911 mL | 1.2277 mL | |
| 60 mM | 0.0409 mL | 0.2046 mL | 0.4092 mL | 1.0231 mL | |
| 80 mM | 0.0307 mL | 0.1535 mL | 0.3069 mL | 0.7673 mL | |
| 100 mM | 0.0246 mL | 0.1228 mL | 0.2455 mL | 0.6138 mL |
Relutrigine Related Classifications
HY-148792 Related Classifications
Powered by Bioz