(S)-GLPG0974
Based on 1 Customer Validation
(S)-GLPG0974 is the isomer of GLPG0974 (HY-12940), and can be used as an experimental control. GLPG0974 is a free fatty acid receptor-2 (FFA2/GPR43) antagonist with an IC50 of 9 nM.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.69%
- CAS. Nr.: 2326220-69-1
- Formel: C25H25ClN2O4S
- Molecular Weight:485.00
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biologische Aktivität
Chemical Information
-
CAS. Nr. 2326220-69-1
-
Appearance Solid
-
Molecular Weight 485.00
-
Formel C25H25ClN2O4S
-
Color White to off-white
-
SMILES
O=C(O)CCCN(C([C@@]1(C)N(C(C2=CSC3=CC=CC=C32)=O)CC1)=O)CC4=CC=CC(Cl)=C4
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 105 mg/mL (216.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 5.25 mg/mL (10.82 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 5.25 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (52.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0619 mL | 10.3093 mL | 20.6186 mL | 51.5464 mL |
| 5 mM | 0.4124 mL | 2.0619 mL | 4.1237 mL | 10.3093 mL | |
| 10 mM | 0.2062 mL | 1.0309 mL | 2.0619 mL | 5.1546 mL | |
| 15 mM | 0.1375 mL | 0.6873 mL | 1.3746 mL | 3.4364 mL | |
| 20 mM | 0.1031 mL | 0.5155 mL | 1.0309 mL | 2.5773 mL | |
| 25 mM | 0.0825 mL | 0.4124 mL | 0.8247 mL | 2.0619 mL | |
| 30 mM | 0.0687 mL | 0.3436 mL | 0.6873 mL | 1.7182 mL | |
| 40 mM | 0.0515 mL | 0.2577 mL | 0.5155 mL | 1.2887 mL | |
| 50 mM | 0.0412 mL | 0.2062 mL | 0.4124 mL | 1.0309 mL | |
| 60 mM | 0.0344 mL | 0.1718 mL | 0.3436 mL | 0.8591 mL | |
| 80 mM | 0.0258 mL | 0.1289 mL | 0.2577 mL | 0.6443 mL | |
| 100 mM | 0.0206 mL | 0.1031 mL | 0.2062 mL | 0.5155 mL |