PTP1B-IN-3
Based on 1 Customer Validation
PTP1B-IN-3 is a potent and orally active PTP1B inhibitor with IC50s of 120 nM for both PTP1B and TCPTP. PTP1B-IN-3 has antidiabetic and anticancer effects.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.69%
- CAS No.: 809272-64-8
- Formule: C12H7BrF2NO3P
- Masse moléculaire:362.06
-
Stockage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
IC50: 120 nM (PTP1B), 120 nM (TCPTP) [2]
In the NDL2 Ptpn1 transgenic mice, PTP1B-IN-3 (compounds 3g; orally; 30 mg/kg for 21 days) shows a significant delay in the onset of tumor development in NDL2 Ptpn1+/+ mice, extending the median tumor free days (T50) from 28 days to 75 days[1].
In diet-induced obese (DIO) mice, PTP1B-IN-3 (compounds 3g) exhibits good oral bioavailability (F of 24%), slow clearance (CL of 0.71 mL/kg/min), and good elimination half live (t1/2 of 6 h). The oral bioavailability in higher species such as rats (F of 4%) and squirrel monkeys (F of 2%) are substantially lower but excellent exposures are achieved with oral dosing[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 809272-64-8
-
Appearance Solid
-
Masse moléculaire 362.06
-
Formule C12H7BrF2NO3P
-
Color White to off-white
-
SMILES
BrC1=C(C(F)(P(O)(O)=O)F)C=C2C(C=CC(C#N)=C2)=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 50 mg/mL (138.10 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Yongxin Han, et al. Discovery of [(3-bromo-7-cyano-2-naphthyl)(difluoro)methyl]phosphonic acid, a potent and orally active small molecule PTP1B inhibitor. Bioorg Med Chem Lett. 2008 Jun 1;18(11):3200-5. [Content Brief]
[2]. Patel D, .Discovery of orally active, potent, and selective benzotriazole-based PTP1B inhibitors. ChemMedChem. 2011 Jun 6; 6(6):1011-6. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7620 mL | 13.8099 mL | 27.6197 mL | 69.0493 mL |
| 5 mM | 0.5524 mL | 2.7620 mL | 5.5239 mL | 13.8099 mL | |
| 10 mM | 0.2762 mL | 1.3810 mL | 2.7620 mL | 6.9049 mL | |
| 15 mM | 0.1841 mL | 0.9207 mL | 1.8413 mL | 4.6033 mL | |
| 20 mM | 0.1381 mL | 0.6905 mL | 1.3810 mL | 3.4525 mL | |
| 25 mM | 0.1105 mL | 0.5524 mL | 1.1048 mL | 2.7620 mL | |
| 30 mM | 0.0921 mL | 0.4603 mL | 0.9207 mL | 2.3016 mL | |
| 40 mM | 0.0690 mL | 0.3452 mL | 0.6905 mL | 1.7262 mL | |
| 50 mM | 0.0552 mL | 0.2762 mL | 0.5524 mL | 1.3810 mL | |
| 60 mM | 0.0460 mL | 0.2302 mL | 0.4603 mL | 1.1508 mL | |
| 80 mM | 0.0345 mL | 0.1726 mL | 0.3452 mL | 0.8631 mL | |
| 100 mM | 0.0276 mL | 0.1381 mL | 0.2762 mL | 0.6905 mL |
PTP1B-IN-3 Related Classifications
HY-15133 Related Classifications
Powered by Bioz