cis-Jasmone
Based on 1 Customer Validation
Cis-Jasmone is a plant-derived natural product. Cis-Jasmone is constitutively released by many flowers and sometimes by leaves as an attractant for pollinators or as a chemical cue for host location by insect flower herbivores. Cis-Jasmone treatment of crop plants not only induces direct defense against herbivores, but also induces indirect defense by releasing VOCs that attract natural enemies.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 98.22%
- CAS No.: 488-10-8
- Formule: C11H16O
- Masse moléculaire:164.24
-
Stockage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-N7058R
cis-?Jasmone (Standard)Natural Product -
HY-W010201
CitronellolApoptosis Inducer -
HY-N7098
DihydrojasmoneAroma Compound -
HY-B1080
Tilorone dihydrochlorideAntiviral Drug -
HY-W010201R
Citronellol (Standard)Apoptosis Inducer -
HY-W035214
Hydroxyisohexyl 3-cyclohexene carboxaldehydeHapten -
HY-N7098R
Dihydrojasmone (Standard)Aroma Compound -
HY-W010203
2-DecanoneAntifungal Agent -
HY-B1080R
Tilorone dihydrochloride (Standard)Antiviral Drug
Activité biologique
Description
In Vitro
cis-Jasmone exhibits repellent effect on aphids through activation of olfactory receptors on the aphids antennae. cis-Jasmone attracts aphid natural enemies through release of plant volatile substances, thereby enhancing the plant's defense ability[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 488-10-8
-
Appearance Liquid (Density: 0.94 g/cm3 )
-
Masse moléculaire 164.24
-
Formule C11H16O
-
Color Colorless to light yellow
-
SMILES
CC/C=C\CC1=C(CCC1=O)C
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : ≥ 100 mg/mL (608.87 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (30.44 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (30.44 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 50% PEG300 50% Saline
Solubility: 25 mg/mL (152.22 mM); Suspended solution; Need ultrasonic
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (275 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Sobhy IS, et al. cis-Jasmone Elicits Aphid-Induced Stress Signalling in Potatoes. J Chem Ecol. 2017 Jan;43(1):39-52. [Content Brief]
[2]. Birkett MA, et al., New roles for cis-jasmone as an insect semiochemical and in plant defense. Proc Natl Acad Sci U S A. 2000 Aug 1;97(16):9329-34. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 6.0887 mL | 30.4433 mL | 60.8865 mL | 152.2163 mL |
| 5 mM | 1.2177 mL | 6.0887 mL | 12.1773 mL | 30.4433 mL | |
| 10 mM | 0.6089 mL | 3.0443 mL | 6.0887 mL | 15.2216 mL | |
| 15 mM | 0.4059 mL | 2.0296 mL | 4.0591 mL | 10.1478 mL | |
| 20 mM | 0.3044 mL | 1.5222 mL | 3.0443 mL | 7.6108 mL | |
| 25 mM | 0.2435 mL | 1.2177 mL | 2.4355 mL | 6.0887 mL | |
| 30 mM | 0.2030 mL | 1.0148 mL | 2.0296 mL | 5.0739 mL | |
| 40 mM | 0.1522 mL | 0.7611 mL | 1.5222 mL | 3.8054 mL | |
| 50 mM | 0.1218 mL | 0.6089 mL | 1.2177 mL | 3.0443 mL | |
| 60 mM | 0.1015 mL | 0.5074 mL | 1.0148 mL | 2.5369 mL | |
| 80 mM | 0.0761 mL | 0.3805 mL | 0.7611 mL | 1.9027 mL | |
| 100 mM | 0.0609 mL | 0.3044 mL | 0.6089 mL | 1.5222 mL |
cis-Jasmone Related Classifications
HY-N7058 Related Classifications
Powered by Bioz