Ethyl maltol
Based on 1 Customer Validation
Ethyl maltol (2-Ethyl-3-hydroxy-4H-pyran-4-one) is an orally active and important food additive and flavor enhancer. Ethyl maltol is less toxic to rats and dogs. Ethyl maltol can enhance copper-mediated cytotoxicity and induce apoptosis in lung epithelial cells.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.97%
- CAS No.: 4940-11-8
- Formule: C7H8O3
- Masse moléculaire:140.14
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Metabolism/Protease Compound Library
HY-L012
-
Anti-Aging Compound Library
HY-L034
-
Oxygen Sensing Compound Library
HY-L045
-
Medicine Food Homology Compound Library
HY-L055
-
Orally Active Compound Library
HY-L061
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Food Additive Library
HY-L093
-
Inactive Ingredient Library
HY-L096
-
Human Metabolite Library
HY-L123
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Natural Product-like Compound Library
HY-L021L
-
Natural Product and Natural Product-Like Compound Library
HY-L021M
-
Bioactive Compound Library
HY-L001
-
Structurally Diverse Fragment Library
HY-L187
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Flavors and Fragrances Compound Library
HY-L242
-
Environmental Pollutant Compound Library
HY-L247
Activité biologique
Ethyl maltol (3 mM; 24 h) induces cell apoptosis and leads to oxidative stress and DNA damage in copper traeated lung epithelial cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Cu treated Calu-6 cells
-
Concentration:3 mM
-
Incubation Time:24 h
-
Result:Increased pATM phosphorylation level.
-
Cell Line:Cu treated Calu-6 cells
-
Concentration:3 mM
-
Incubation Time:24 h
-
Result:Increased the expression of ferritin light chain and hemeoxygenase.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 4940-11-8
-
Appearance Solid
-
Masse moléculaire 140.14
-
Formule C7H8O3
-
Color White to off-white
-
SMILES
O=C1C(O)=C(CC)OC=C1
-
Synonyms
2-Ethyl-3-hydroxy-4H-pyran-4-one
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (713.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (14.84 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (14.84 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Durrani K, et al. Ethyl maltol enhances copper mediated cytotoxicity in lung epithelial cells. Toxicol Appl Pharmacol. 2021 Jan 1;410:115354. [Content Brief]
[2]. Gralla EJ, et al. Toxicity studies with ethyl maltol. Toxicol Appl Pharmacol. 1969 Nov;15(3):604-13. [Content Brief]
[3]. Niu Y, et al. Characterization of odor-active compounds of various cherry wines by gas chromatography-mass spectrometry, gas chromatography-olfactometry and their correlation with sensory attributes. J Chromatogr B Analyt Technol Biomed Life Sci. 2011 Aug 1;879(23):2287-93. [Content Brief]
[4]. Li Z, et al. Toxicity Studies of Ethyl Maltol and Iron Complexes in Mice.Biomed Res Int. 2017;2017:2640619. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 7.1357 mL | 35.6786 mL | 71.3572 mL | 178.3930 mL |
| 5 mM | 1.4271 mL | 7.1357 mL | 14.2714 mL | 35.6786 mL | |
| 10 mM | 0.7136 mL | 3.5679 mL | 7.1357 mL | 17.8393 mL | |
| 15 mM | 0.4757 mL | 2.3786 mL | 4.7571 mL | 11.8929 mL | |
| 20 mM | 0.3568 mL | 1.7839 mL | 3.5679 mL | 8.9197 mL | |
| 25 mM | 0.2854 mL | 1.4271 mL | 2.8543 mL | 7.1357 mL | |
| 30 mM | 0.2379 mL | 1.1893 mL | 2.3786 mL | 5.9464 mL | |
| 40 mM | 0.1784 mL | 0.8920 mL | 1.7839 mL | 4.4598 mL | |
| 50 mM | 0.1427 mL | 0.7136 mL | 1.4271 mL | 3.5679 mL | |
| 60 mM | 0.1189 mL | 0.5946 mL | 1.1893 mL | 2.9732 mL | |
| 80 mM | 0.0892 mL | 0.4460 mL | 0.8920 mL | 2.2299 mL | |
| 100 mM | 0.0714 mL | 0.3568 mL | 0.7136 mL | 1.7839 mL |
Ethyl maltol Related Classifications
HY-W010320 Related Classifications
Powered by Bioz