JBJ-07-149
Based on 1 Customer Validation
JBJ-07-149 is an inhibitor for EGFRL858R/T790M with an IC50 of 1.1 nM. JBJ-07-149 inhibits the proliferation of cell Ba/F3 with IC50 of 4.9 μM and 0.148 μM, without and with presence of Cetuximab (HY-P9905). JBJ-07-149 can be used as ligand for target protein in synthesis of DDC-01-163 (HY-139997).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.09%
- CAS No.: 2140807-58-3
- Formule: C28H26N6O2S
- Masse moléculaire:510.61
-
Stockage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Voir tous les produits spécifiques à Isoform EGFR
More
Activité biologique
|
EGFRL858R/T790M 1.1 nM (IC50) |
Chemical Information
-
CAS No. 2140807-58-3
-
Appearance Solid
-
Masse moléculaire 510.61
-
Formule C28H26N6O2S
-
Color White to off-white
-
SMILES
O=C1C2=CC(C3=CC=C(N4CCNCC4)N=C3)=CC=C2CN1C(C5=CC=CC=C5)C(NC6=NC=CS6)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (195.84 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.45 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (2.45 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9584 mL | 9.7922 mL | 19.5844 mL | 48.9610 mL |
| 5 mM | 0.3917 mL | 1.9584 mL | 3.9169 mL | 9.7922 mL | |
| 10 mM | 0.1958 mL | 0.9792 mL | 1.9584 mL | 4.8961 mL | |
| 15 mM | 0.1306 mL | 0.6528 mL | 1.3056 mL | 3.2641 mL | |
| 20 mM | 0.0979 mL | 0.4896 mL | 0.9792 mL | 2.4481 mL | |
| 25 mM | 0.0783 mL | 0.3917 mL | 0.7834 mL | 1.9584 mL | |
| 30 mM | 0.0653 mL | 0.3264 mL | 0.6528 mL | 1.6320 mL | |
| 40 mM | 0.0490 mL | 0.2448 mL | 0.4896 mL | 1.2240 mL | |
| 50 mM | 0.0392 mL | 0.1958 mL | 0.3917 mL | 0.9792 mL | |
| 60 mM | 0.0326 mL | 0.1632 mL | 0.3264 mL | 0.8160 mL | |
| 80 mM | 0.0245 mL | 0.1224 mL | 0.2448 mL | 0.6120 mL | |
| 100 mM | 0.0196 mL | 0.0979 mL | 0.1958 mL | 0.4896 mL |