Morusinol
Based on 1 Customer Validation
Morusinol is a flavonoid isolated from Morus alba root bark. Morusinol has an antiplatelet activity and significantly inhibits arterial thrombosis in vivo.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.68%
- CAS No.: 62949-93-3
- Formule: C25H26O7
- Masse moléculaire:438.47
-
Stockage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Activité biologique
IC50: arterial thrombosis[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | IC50 |
135.9 μM
Compound: 6
|
Inhibition of human recombinant BACE-1 expressed in HEK293 cells assessed as inhibition of amyloid precursor protein cleavage into amyloid beta after 60 mins using Rh-EVNLDAEFK-Quencher as a substrate by FRET assay
Inhibition of human recombinant BACE-1 expressed in HEK293 cells assessed as inhibition of amyloid precursor protein cleavage into amyloid beta after 60 mins using Rh-EVNLDAEFK-Quencher as a substrate by FRET assay
|
[PMID: 21511472] |
| RAW264.7 | IC50 |
4.1 μg/mL
Compound: 4; 8
|
Inhibition of LPS-induced NO production in mouse RAW264.7 cells measured after 24 hrs by Griess assay
Inhibition of LPS-induced NO production in mouse RAW264.7 cells measured after 24 hrs by Griess assay
|
[PMID: 27908762] |
| THP-1 | IC50 |
4.3 μM
Compound: 8
|
Cytotoxicity against human THP1 cells after 24 hrs by WST1 assay
Cytotoxicity against human THP1 cells after 24 hrs by WST1 assay
|
[PMID: 24901948] |
Chemical Information
-
CAS No. 62949-93-3
-
Appearance Solid
-
Masse moléculaire 438.47
-
Formule C25H26O7
-
Color Light yellow to yellow
-
SMILES
O=C1C2=C(O)C=C3C(C=CC(C)(C)O3)=C2OC(C4=CC=C(O)C=C4O)=C1CCC(C)(O)C
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvant et solubilité
DMSO : ≥ 100 mg/mL (228.07 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.70 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.70 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2807 mL | 11.4033 mL | 22.8066 mL | 57.0164 mL |
| 5 mM | 0.4561 mL | 2.2807 mL | 4.5613 mL | 11.4033 mL | |
| 10 mM | 0.2281 mL | 1.1403 mL | 2.2807 mL | 5.7016 mL | |
| 15 mM | 0.1520 mL | 0.7602 mL | 1.5204 mL | 3.8011 mL | |
| 20 mM | 0.1140 mL | 0.5702 mL | 1.1403 mL | 2.8508 mL | |
| 25 mM | 0.0912 mL | 0.4561 mL | 0.9123 mL | 2.2807 mL | |
| 30 mM | 0.0760 mL | 0.3801 mL | 0.7602 mL | 1.9005 mL | |
| 40 mM | 0.0570 mL | 0.2851 mL | 0.5702 mL | 1.4254 mL | |
| 50 mM | 0.0456 mL | 0.2281 mL | 0.4561 mL | 1.1403 mL | |
| 60 mM | 0.0380 mL | 0.1901 mL | 0.3801 mL | 0.9503 mL | |
| 80 mM | 0.0285 mL | 0.1425 mL | 0.2851 mL | 0.7127 mL | |
| 100 mM | 0.0228 mL | 0.1140 mL | 0.2281 mL | 0.5702 mL |