WWL113
Based on 1 Customer Validation
WWL113 is a selective and orally active Ces3 and Ces1f inhibitor, with IC50 values of 120 nM and 100 nM for Ces3 and Ces1f, respectively. WWL113 appears to show excellent selectivity for the 60-kDa serine hydrolase (or hydrolases).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.72%
- CAS No.: 947669-86-5
- Formule: C29H26N2O4
- Masse moléculaire:466.53
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Activité biologique
|
CES1 |
CES3 |
Ces3 and Ces1f are endoplasmic reticulum glycoproteins that have been previously associated with adipocyte lipolysis. WWL113 inhibits mouse recombinant Ces1, Ces1c, and ABHD6 at 10 μM[1].
WWL113 (1 μM) significantly increases UCP1 protein expression in brown adipocytes[2].
WWL113 has a partial, statistically significant inhibitory effect on blocking the buildup of PGE2[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
WWL113 ameliorates obesity-diabetes in mice[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Eight-week-old db/db mice (n = 10 per group)[1].
-
Dosage:30 mg/kg.
-
Administration:Orally once a day for 3 weeks.
-
Result:Corrected multiple features of metabolic syndrome in db/db mice.
Chemical Information
-
CAS No. 947669-86-5
-
Appearance Solid
-
Masse moléculaire 466.53
-
Formule C29H26N2O4
-
Color White to off-white
-
SMILES
CN(CC1=CC(C2=CC=NC=C2)=CC=C1)C(OC3=CC=C(C4=CC=C(C(OCC)=O)C=C4)C=C3)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 20.83 mg/mL (44.65 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Dominguez, E., Galmozzi, A., Chang, J.W., et al. Integrated phenotypic and activity-based profiling links Ces3 to obesity and diabetes. Nat. Chem. Biol. 10(2), 113-121 (2014). [Content Brief]
[2]. Galmozzi, et al. ThermoMouse: an in vivo model to identify modulators of UCP1 expression in brown adipose tissue. Cell Rep. 2014 Dec 11;9(5):1584-1593. [Content Brief]
[3]. Turcotte C, et al. The Endocannabinoid Metabolite Prostaglandin E2 (PGE2)-Glycerol Inhibits Human Neutrophil Functions: Involvement of Its Hydrolysis into PGE2 and EP Receptors. J Immunol. 2017 Apr 15;198(8):3255-3263. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1435 mL | 10.7174 mL | 21.4348 mL | 53.5871 mL |
| 5 mM | 0.4287 mL | 2.1435 mL | 4.2870 mL | 10.7174 mL | |
| 10 mM | 0.2143 mL | 1.0717 mL | 2.1435 mL | 5.3587 mL | |
| 15 mM | 0.1429 mL | 0.7145 mL | 1.4290 mL | 3.5725 mL | |
| 20 mM | 0.1072 mL | 0.5359 mL | 1.0717 mL | 2.6794 mL | |
| 25 mM | 0.0857 mL | 0.4287 mL | 0.8574 mL | 2.1435 mL | |
| 30 mM | 0.0714 mL | 0.3572 mL | 0.7145 mL | 1.7862 mL | |
| 40 mM | 0.0536 mL | 0.2679 mL | 0.5359 mL | 1.3397 mL |