X5050
Based on 4 publication(s) in Google Scholar
X5050 is a REST inhibitor, with an EC50 of 2.1 μM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.05%
- CAS No.: 2404756-81-4
- Formule: C17H15N3O3
- Masse moléculaire:309.32
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) X5050
MoreVoir tous les produits spécifiques à Isoform DNA/RNA Synthesis
More
Activité biologique
X5050 (100 µM, 1 day) induces a dosedependent decrease in the REST isoform in protein level[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:NSCs.
-
Concentration:100 µM.
-
Incubation Time:One day.
-
Result:Induced a dosedependent decrease in the 122 kDa longer REST isoform.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:12-week-old male C57Bl6 mice[1].2
-
Dosage:2 x 2µl of 20 mM in 10% DMSO in water.
-
Administration:Intraventricular injection.
-
Result:Increased BDNF expression.
A decrease in Darpp32 and Snap25 expression was found by QRT-PCR in the lesioned striatum as compared with the contralateral striatum.
Significantly increased the levels of Bdnf II splice variant (exon II containing variant) while Bdnf IV levels were not significantly changed.
Chemical Information
-
CAS No. 2404756-81-4
-
Appearance Solid
-
Masse moléculaire 309.32
-
Formule C17H15N3O3
-
Color White to light yellow
-
SMILES
O=C(C1=CC=C2N=C(C3=CC=CC=C3O)NC2=C1)NOCC=C
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Cancer Lett
TAp73α drives cancer metastasis via PPI-mediated derepression of the neuronal HDAC2/REST-GABBR2 axis. [Abstract]2025 Jun 10:217867. PMID: 40505831 -
Proc Natl Acad Sci U S A
miR-96-5p expression is sufficient to induce and maintain the senescent cell fate in the absence of stress. [Abstract]2024 Oct;121(40):e2321182121. PMID: 39325426 -
Cell Commun Signal
REST contributes to renal fibrosis through inducing mitochondrial energy metabolism imbalance in tubular epithelial cells. [Abstract]2025 Apr 8;23(1):176. PMID: 40200371 -
J Biol Chem
DNMT3b-mediated CpA methylation facilitates REST binding and gene silencing and exacerbates hippocampal demyelination in diabetic mice. [Abstract]2024 Dec 25:108137. PMID: 39730060
Solvant et solubilité
DMSO : 100 mg/mL (323.29 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.08 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2329 mL | 16.1645 mL | 32.3290 mL | 80.8224 mL |
| 5 mM | 0.6466 mL | 3.2329 mL | 6.4658 mL | 16.1645 mL | |
| 10 mM | 0.3233 mL | 1.6164 mL | 3.2329 mL | 8.0822 mL | |
| 15 mM | 0.2155 mL | 1.0776 mL | 2.1553 mL | 5.3882 mL | |
| 20 mM | 0.1616 mL | 0.8082 mL | 1.6164 mL | 4.0411 mL | |
| 25 mM | 0.1293 mL | 0.6466 mL | 1.2932 mL | 3.2329 mL | |
| 30 mM | 0.1078 mL | 0.5388 mL | 1.0776 mL | 2.6941 mL | |
| 40 mM | 0.0808 mL | 0.4041 mL | 0.8082 mL | 2.0206 mL | |
| 50 mM | 0.0647 mL | 0.3233 mL | 0.6466 mL | 1.6164 mL | |
| 60 mM | 0.0539 mL | 0.2694 mL | 0.5388 mL | 1.3470 mL | |
| 80 mM | 0.0404 mL | 0.2021 mL | 0.4041 mL | 1.0103 mL | |
| 100 mM | 0.0323 mL | 0.1616 mL | 0.3233 mL | 0.8082 mL |
X5050 Related Classifications
HY-136833 Related Classifications
Powered by Bioz