Rimacalib
Based on 1 Customer Validation
Rimacalib (SMP 114) is a Ca2+/calmodulin-dependent protein kinase II (CaMKII) inhibitor, with IC50s of ~1 μM for CaMKIIα to ~30 μM for CaMKIIγ.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.14%
- CAS. Nr.: 215174-50-8
- Formel: C22H23FN4O2
- Molecular Weight:394.44
-
Speicherung:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Targeted Diversity Library
HY-L099
-
Rare Diseases Drug Library
HY-L102
-
Highly Selective Inhibitors Library
HY-L158
-
Cell Death Library
HY-L162
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
-
Kinase Inhibitor Library
HY-L009
-
Neuronal Signaling Compound Library
HY-L013
-
Clinical Compound Library
HY-L026
-
Autophagy Compound Library
HY-L029
-
Drug Repurposing Compound Library
HY-L035
Biologische Aktivität
|
CaMK IIα 1 μM (IC50) |
CaMK IIγ 30 μM (IC50) |
Rimacalib (SMP-114) improves (by ~40%) Ca2+-transient potentiation during the 30 s stimulation pause, higher Fura-2 transient amplitude after the pause upon Rimacalib vs. 37.2±4.3% in control, n=60/17 cells/mice vs. n=65/17, p<0.05) and in parallel cardiomyocyte contractility (135.0±15.4% vs. 97.2±16% increase of twitch amplitude, p=0.098)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 215174-50-8
-
Appearance Solid
-
Molecular Weight 394.44
-
Formel C22H23FN4O2
-
Color Off-white to pink
-
SMILES
N=C(N1CCOCC1)NC2=CC([C@H](C3=CC=C(C4=CC=CC=C4)C(F)=C3)C)=NO2
-
Synonyms
SMP 114
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 125 mg/mL (316.90 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Ethanol : 16.67 mg/mL (42.26 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.27 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.27 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
Cardiomyocytes from mice are pre-incubated with Rimacalib (10 μM) for at least 15 min by including the dye in the loading buffer for Ca2+-fluorescent dyes or by pre-incubation in experimental solution for 15 min (patch-clamp experiments)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| Ethanol / DMSO | 1 mM | 2.5352 mL | 12.6762 mL | 25.3524 mL | 63.3810 mL |
| 5 mM | 0.5070 mL | 2.5352 mL | 5.0705 mL | 12.6762 mL | |
| 10 mM | 0.2535 mL | 1.2676 mL | 2.5352 mL | 6.3381 mL | |
| 15 mM | 0.1690 mL | 0.8451 mL | 1.6902 mL | 4.2254 mL | |
| 20 mM | 0.1268 mL | 0.6338 mL | 1.2676 mL | 3.1690 mL | |
| 25 mM | 0.1014 mL | 0.5070 mL | 1.0141 mL | 2.5352 mL | |
| 30 mM | 0.0845 mL | 0.4225 mL | 0.8451 mL | 2.1127 mL | |
| 40 mM | 0.0634 mL | 0.3169 mL | 0.6338 mL | 1.5845 mL | |
| DMSO | 50 mM | 0.0507 mL | 0.2535 mL | 0.5070 mL | 1.2676 mL |
| 60 mM | 0.0423 mL | 0.2113 mL | 0.4225 mL | 1.0563 mL | |
| 80 mM | 0.0317 mL | 0.1585 mL | 0.3169 mL | 0.7923 mL | |
| 100 mM | 0.0254 mL | 0.1268 mL | 0.2535 mL | 0.6338 mL |
Rimacalib Related Classifications
HY-100779 Related Classifications
Powered by Bioz