BMS-986020
Based on 9 publication(s) in Google Scholar
BMS-986020 (AM152) is a high-affinity and selective lysophosphatidic acid receptor 1 (LPA1) antagonist. BMS-986020 inhibits bile acid and phospholipid transporters with IC50s of 4.8 μM, 6.2 μM, and 7.5 μM for BSEP, MRP4, and MDR3, respectively. BMS-986020 has the potential for the treatment of idiopathic pulmonary fibrosis (IPF).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.91%
- CAS No.: 1257213-50-5
- Formule: C29H26N2O5
- Masse moléculaire:482.53
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Rare Diseases Drug Library
HY-L102
-
Anti-Pulmonary Fibrosis Compound Library
HY-L125
-
Pain-Related Compound Library
HY-L139
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Inhibitors Library
HY-L158
-
Anti-Drug-Resistant Compound Library
HY-L169
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
-
GPCR/G Protein Compound Library
HY-L006
-
Immunology/Inflammation Compound Library
HY-L007
-
Clinical Compound Library
HY-L026
-
Drug Repurposing Compound Library
HY-L035
Publications Citing Use of MedChemExpress (MCE) BMS-986020
More- Sci Adv. 2021 Sep 17;7(38):eabb5933. [Abstract]
- Cell Commun Signal. 2023 Sep 25;21(1):257. [Abstract]
- Cell Rep. 2019 Nov 12;29(7):1832-1847.e8. [Abstract]
- Cells. 2024 Jul 6;13(13):1152. [Abstract]
- Commun Biol. 2024 May 23;7(1):621. [Abstract]
- Carcinogenesis. 2021 Apr 30;42(4):611-620. [Abstract]
- J Appl Toxicol. 2024 Nov;44(11):1725-1741. [Abstract]
- J Pharmacol Sci. 2025 Jun;158(2):139-142. [Abstract]
- Seoul National University. 2024 Feb.
Activité biologique
IC50: 4.8 µM (BSEP); 6.2 µM (MRP4); 7.5 µM (MDR3)[2]
BMS-986020 (0.1-10 nM; pre-incubated) concentration-dependent displacement of [18F]BMT-083133 binding is observed in LPA1+ cells and lung sections.?At 0.1 nM, the percent displacement in healthy mice, bleomycin mice, and IPF lungs is 18%, 24%, and 31%, respectively. At 10 nM, the percent displacement is 73%, 76%, and 64%, respectively.[18F]BMT-083133, a radioligand targeting LPA1 is developed as a translational research tool for assessment of lung LPA1 engagement of BMS-986020 using in vitro autoradiography (ARG)[4].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1257213-50-5
-
Appearance Solid
-
Masse moléculaire 482.53
-
Formule C29H26N2O5
-
Color White to yellow
-
SMILES
O=C(C1(C2=CC=C(C3=CC=C(C4=C(NC(O[C@@H](C5=CC=CC=C5)C)=O)C(C)=NO4)C=C3)C=C2)CC1)O
-
Synonyms
AM152
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (9)
-
Journal Impact Factor
-
Most Recent
-
Sci Adv
Targeting lysophospholipid acid receptor 1 and ROCK kinases promotes antiviral innate immunity. [Abstract]2021 Sep 17;7(38):eabb5933. PMID: 34533996 -
Cell Commun Signal
LPA1-mediated inhibition of CXCR4 attenuates CXCL12-induced signaling and cell migration. [Abstract]2023 Sep 25;21(1):257. PMID: 37749552 -
Cell Rep
Single-Cell Transcriptomics Uncovers Zonation of Function in the Mesenchyme during Liver Fibrosis. [Abstract]2019 Nov 12;29(7):1832-1847.e8. PMID: 31722201 -
Cells
2024 Jul 6;13(13):1152. PMID: 38995003 -
Commun Biol
2024 May 23;7(1):621. PMID: 38783088 -
Carcinogenesis
Lysophosphatidic acid mediated PI3K/Akt activation contributed to esophageal squamous cell cancer progression. [Abstract]2021 Apr 30;42(4):611-620. PMID: 33367557 -
J Appl Toxicol
Oleanolic acid induces hepatic injury by disrupting hepatocyte tight junction and dysregulation of farnesoid X receptor-mediated bile acid efflux transporters. [Abstract]2024 Nov;44(11):1725-1741. PMID: 39030772 -
J Pharmacol Sci
A novel lysophosphatidic acid receptor 1 antagonist with high brain penetrability has a curative effect in the empathic pain-related fibromyalgia model. [Abstract]2025 Jun;158(2):139-142. PMID: 40288824 -
Solvant et solubilité
DMSO : 125 mg/mL (259.05 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.31 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 0.5% CMC/saline water
Solubility: 5 mg/mL (10.36 mM); Suspended solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (281 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Kihara Y, et al. Lysophospholipid receptors in drug discovery. Exp Cell Res. 2015 May 1;333(2):171-7. [Content Brief]
[3]. Palmer SM, et al. Randomized, Double-Blind, Placebo-Controlled, Phase 2 Trial of BMS-986020, a Lysophosphatidic Acid Receptor Antagonist for the Treatment of Idiopathic Pulmonary Fibrosis. Chest. 2018 Nov;154(5):1061-1069. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0724 mL | 10.3621 mL | 20.7241 mL | 51.8103 mL |
| 5 mM | 0.4145 mL | 2.0724 mL | 4.1448 mL | 10.3621 mL | |
| 10 mM | 0.2072 mL | 1.0362 mL | 2.0724 mL | 5.1810 mL | |
| 15 mM | 0.1382 mL | 0.6908 mL | 1.3816 mL | 3.4540 mL | |
| 20 mM | 0.1036 mL | 0.5181 mL | 1.0362 mL | 2.5905 mL | |
| 25 mM | 0.0829 mL | 0.4145 mL | 0.8290 mL | 2.0724 mL | |
| 30 mM | 0.0691 mL | 0.3454 mL | 0.6908 mL | 1.7270 mL | |
| 40 mM | 0.0518 mL | 0.2591 mL | 0.5181 mL | 1.2953 mL | |
| 50 mM | 0.0414 mL | 0.2072 mL | 0.4145 mL | 1.0362 mL | |
| 60 mM | 0.0345 mL | 0.1727 mL | 0.3454 mL | 0.8635 mL | |
| 80 mM | 0.0259 mL | 0.1295 mL | 0.2591 mL | 0.6476 mL | |
| 100 mM | 0.0207 mL | 0.1036 mL | 0.2072 mL | 0.5181 mL |
BMS-986020 Related Classifications
HY-100619 Related Classifications
Powered by Bioz