Asarinin
Based on 1 Customer Validation
Asarinin is a extract lignan from Asarum sieboldii Miq., mainly produced in roots of this herb.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.84%
- CAS No.: 133-05-1
- Formule: C20H18O6
- Masse moléculaire:354.35
-
Stockage:
RT, sealed storage, away from moisture and light.
In solvent -80°C, 1 year , -20°C, 6 months
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Natural Product Library
HY-L021
-
Anti-Cancer Compound Library
HY-L025
-
Traditional Chinese Medicine Active Compound Library
HY-L065
-
Anti-Cancer Natural Product Library
HY-L107
-
Plant-Sourced Natural Product Library
HY-L115
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Natural Product Library Plus
HY-L021P
-
Natural Product and Natural Product-Like Compound Library
HY-L021M
-
Bioactive Compound Library
HY-L001
-
PBCRBS Traditional Chinese Medicine Compound Library
HY-L193
-
High-Throughput Bioactive Compound Library
HY-L205
-
High-Throughput Natural Product Library
HY-L206
-
Ancient Chinese Classical Formulas Traditional Chinese Medicine Active Compound Library
HY-L209
-
Antitussive and Antiasthmatic Traditional Chinese Medicine Active Compound Library
HY-L223
-
Diarrhea-Related Traditional Chinese Medicine Active Compound Library
HY-L224
-
Mongolian Medicine Compound Library
HY-L238
-
Natural Product Diversity Scaffold Library
HY-L245
-
Mass Spectrometry Natural Product Library
HY-L262
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HepG2 | EC50 |
>60 μM
Compound: 5
|
Transactivation of PPAR expressed in HepG2 cells after 20 hrs by luminescence assay
Transactivation of PPAR expressed in HepG2 cells after 20 hrs by luminescence assay
|
[PMID: 22381047] |
| HepG2 | IC50 |
7.1 μM
Compound: 5
|
Inhibition of TNFalpha-induced NFkappaB transcriptional activity in human HepG2 cells pretreated for 1 hr before TNFalpha challenge by luciferase reporter gene analysis
Inhibition of TNFalpha-induced NFkappaB transcriptional activity in human HepG2 cells pretreated for 1 hr before TNFalpha challenge by luciferase reporter gene analysis
|
[PMID: 22381047] |
| NIH3T3 | IC50 |
0.2 μM
Compound: 1
|
Cytotoxicity against murine 3T3 cells by MTT assay
Cytotoxicity against murine 3T3 cells by MTT assay
|
[PMID: 17253847] |
Chemical Information
-
CAS No. 133-05-1
-
Appearance Solid
-
Masse moléculaire 354.35
-
Formule C20H18O6
-
Color White to off-white
-
SMILES
[H][C@@]12[C@@](CO[C@@H]2C3=CC=C(OCO4)C4=C3)([H])[C@H](C5=CC=C(OCO6)C6=C5)OC1
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
RT, sealed storage, away from moisture and light
In solvent -80°C 1 year -20°C 6 months
Solvant et solubilité
DMSO : 100 mg/mL (282.21 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.06 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8221 mL | 14.1103 mL | 28.2207 mL | 70.5517 mL |
| 5 mM | 0.5644 mL | 2.8221 mL | 5.6441 mL | 14.1103 mL | |
| 10 mM | 0.2822 mL | 1.4110 mL | 2.8221 mL | 7.0552 mL | |
| 15 mM | 0.1881 mL | 0.9407 mL | 1.8814 mL | 4.7034 mL | |
| 20 mM | 0.1411 mL | 0.7055 mL | 1.4110 mL | 3.5276 mL | |
| 25 mM | 0.1129 mL | 0.5644 mL | 1.1288 mL | 2.8221 mL | |
| 30 mM | 0.0941 mL | 0.4703 mL | 0.9407 mL | 2.3517 mL | |
| 40 mM | 0.0706 mL | 0.3528 mL | 0.7055 mL | 1.7638 mL | |
| 50 mM | 0.0564 mL | 0.2822 mL | 0.5644 mL | 1.4110 mL | |
| 60 mM | 0.0470 mL | 0.2352 mL | 0.4703 mL | 1.1759 mL | |
| 80 mM | 0.0353 mL | 0.1764 mL | 0.3528 mL | 0.8819 mL | |
| 100 mM | 0.0282 mL | 0.1411 mL | 0.2822 mL | 0.7055 mL |
Powered by Bioz