L-Cysteic acid
Based on 1 Customer Validation
L-Cysteic acid is the oxidation product of L-cystine. L-Cysteic acid is a substrate of GADCase/CADCaseII. L-Cysteic acid has high affinity with CADCase I (Km = 0.22 mM). L-Cysteic acid is taken up by the synaptosome through a high affinity, Na+-dependent transport system.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.0%
- CAS No.: 498-40-8
- Formule: C3H7NO5S
- Masse moléculaire:169.16
-
Stockage:
RT, protect from light.
In solvent -80°C, 1 year , -20°C, 6 months
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
Human Endogenous Metabolite Compound Library
HY-L030
-
Gut Microbial Metabolite Library
HY-L078
-
Microbial Metabolite Library
HY-L084
-
Food-Sourced Compound Library
HY-L094
-
Human Metabolite Library
HY-L123
-
Animal-Sourced Natural Product Library
HY-L157
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Non-natural Amino Acid Compound Library
HY-L198
-
High-Throughput Bioactive Compound Library
HY-L205
-
Mass Spectrometry Human Endogenous Metabolite Library
HY-L207
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Cosmetic Ingredient Compound Library
HY-L221
-
Natural Product Diversity Scaffold Library
HY-L245
Voir tous les produits spécifiques à Isoform Endogenous Metabolite
More
Activité biologique
|
Human Endogenous Metabolite |
Chemical Information
-
CAS No. 498-40-8
-
Appearance Solid
-
Masse moléculaire 169.16
-
Formule C3H7NO5S
-
Color White to off-white
-
SMILES
N[C@H](C(O)=O)CS(=O)(O)=O
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
RT, protect from light
In solvent -80°C 1 year -20°C 6 months
Solvant et solubilité
DMSO : 25 mg/mL (147.79 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (14.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (14.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Wu JY. Purification and characterization of cysteic acid and cysteine sulfinic acid decarboxylase and L-glutamate decarboxylase from bovine brain. Proc Natl Acad Sci U S A. 1982 Jul;79(14):4270-4. [Content Brief]
[2]. Wilson DF, et al. Transport of cysteate by synaptosomes isolated from rat brain: evidence that it utilizes the same transporter as aspartate, glutamate, and cysteine sulfinate. J Neurochem. 1986 Oct;47(4):1091-7. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.9116 mL | 29.5578 mL | 59.1156 mL | 147.7891 mL |
| 5 mM | 1.1823 mL | 5.9116 mL | 11.8231 mL | 29.5578 mL | |
| 10 mM | 0.5912 mL | 2.9558 mL | 5.9116 mL | 14.7789 mL | |
| 15 mM | 0.3941 mL | 1.9705 mL | 3.9410 mL | 9.8526 mL | |
| 20 mM | 0.2956 mL | 1.4779 mL | 2.9558 mL | 7.3895 mL | |
| 25 mM | 0.2365 mL | 1.1823 mL | 2.3646 mL | 5.9116 mL | |
| 30 mM | 0.1971 mL | 0.9853 mL | 1.9705 mL | 4.9263 mL | |
| 40 mM | 0.1478 mL | 0.7389 mL | 1.4779 mL | 3.6947 mL | |
| 50 mM | 0.1182 mL | 0.5912 mL | 1.1823 mL | 2.9558 mL | |
| 60 mM | 0.0985 mL | 0.4926 mL | 0.9853 mL | 2.4632 mL | |
| 80 mM | 0.0739 mL | 0.3695 mL | 0.7389 mL | 1.8474 mL | |
| 100 mM | 0.0591 mL | 0.2956 mL | 0.5912 mL | 1.4779 mL |
L-Cysteic acid Related Classifications
HY-124009 Related Classifications
Powered by Bioz