PADRE peptide
Based on 1 Customer Validation
PADRE peptide is a pan-HLA-DR binding epitope and immunostimulant. PADRE peptide binds to the peptide-binding groove of MHC class II molecules for presentation to CD4+ T cells, thereby effectively stimulating specific immune responses. PADRE peptide not only enhances anti-tumor immune responses, inhibits tumor growth and prolongs survival; it also significantly increases the frequency of E7-specific CD8+ T cells and improves therapeutic efficacy against TC-1 tumors when used in combination with E7 peptide-based vaccines and poly (I:C). The intensity of the immune response induced by PADRE peptide is lower than that of the Ii-PADRE DNA vaccine, and it fails to enhance the immune effect of CRT-E7 DNA. PADRE peptide is widely applicable to research on related tumors such as melanoma, glioblastoma and cervical cancer.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.28%
- CAS No.: 161147-59-7
- Formule: C65H102N16O15
- Masse moléculaire:1347.60
-
Stockage:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
PADRE peptide (20 μg/mouse; s.c.; 2 doses 1 week apart) as a separate mixture with E7 peptide and poly(I:C) induces significantly higher E7-specific CD8+ T cell responses in healthy C57BL/6 mice compared to an E7-PADRE fusion peptide formulation (p=0.019), while also enhancing PADRE-specific CD4+ T cell responses compared to single-peptide vaccination (p < 0.05)[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 (6-8 weeks old; HPV-16 E6-expressing carcinoma model)[1]
-
Dosage:100 µg per mouse
-
Administration:s.c.; twice with 1-week interval; co-administered with CRT-E7 DNA (2 µg per mouse, i.d. via gene gun) on same schedule
-
Result:Generated 41 PADRE-specific CD4+ T cells per 3×105 splenocytes.
Did not significantly increase the number of E7-specific CD8+ T cells compared to CRT-E7 DNA plus adjuvant alone.\nGenerated a similar number of E7-specific CD8+ T cells compared to CRT-E7 DNA plus adjuvant alone.
Generated significantly fewer E7-specific CD8+ T cells than CRT-E7 DNA plus Ii-PADRE DNA.
-
Animal Model:C57BL/6 (female, 5-8 weeks old)[3]
-
Dosage:20 μg/mouse (in combination with HPV-16 E7 (aa 49-57) peptide 20 μg/mouse and poly(I:C) 20 μg/mouse)
-
Administration:s.c.; 2 doses 1 week apart
-
Result:Generated a significantly higher number of E7-specific IFN-γ-secreting CD8+ T cells (260 per 3×105 splenocytes) compared to mice vaccinated with E7 peptide alone or PADRE peptide alone.
Generated a significantly higher number of PADRE-specific IFN-γ-secreting CD4+ T cells (749 per 3×105 splenocytes) compared to mice vaccinated with E7 peptide alone or PADRE peptide alone.
Generated significantly more E7-specific IFN-γ-secreting CD8+ T cells compared to an E7-PADRE fusion peptide (with poly(I:C)), though fewer PADRE-specific IFN-γ-secreting CD4+ T cells.
Showed equivalent memory E7-specific CD8+ T cell and PADRE-specific CD4+ T cell counts at 5 weeks post-final vaccination compared to the E7-PADRE fusion peptide group.
Chemical Information
-
CAS No. 161147-59-7
-
Appearance Solid
-
Masse moléculaire 1347.60
-
Formule C65H102N16O15
-
Color White to off-white
-
Sequence
Ala-Lys-Phe-Val-Ala-Ala-Trp-Thr-Leu-Lys-Ala-Ala-Ala
-
Sequence Shortening
AKFVAAWTLKAAA
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
H2O : 10 mg/mL (7.42 mM; Need ultrasonic)
DMSO : 2 mg/mL (1.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.2 mg/mL (0.15 mM); Clear solution
This protocol yields a clear solution of ≥ 0.2 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (2.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 0.2 mg/mL (0.15 mM); Clear solution
This protocol yields a clear solution of ≥ 0.2 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (2.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Hung CF, et al. DNA vaccines encoding Ii-PADRE generates potent PADRE-specific CD4+ T-cell immune responses and enhances vaccine potency. Mol Ther. 2007;15(6):1211-1219. [Content Brief]
[2]. Tran TA, et al. The long multi-epitope peptide vaccine combined with adjuvants improved the therapeutic effects in a glioblastoma mouse model. Front Immunol. 2022;13:1007285. Published 2022 Nov 9. [Content Brief]
[3]. Wu CY, et al. Improving therapeutic HPV peptide-based vaccine potency by enhancing CD4+ T help and dendritic cell activation. J Biomed Sci. 2010;17(1):88. Published 2010 Nov 22. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 0.7421 mL | 3.7103 mL | 7.4206 mL | 18.5515 mL |
| H2O | 5 mM | 0.1484 mL | 0.7421 mL | 1.4841 mL | 3.7103 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
PADRE peptide Related Classifications
HY-P11303 Related Classifications
Powered by Bioz