PEPA
Based on 1 Customer Validation
PEPA is an AMPA receptor allosteric potentiator. PEPA shows preferential action of PEPA on the flop form of AMPA receptors. PEPA is a more potent suppressor of desensitization of receptors containing GluR3 and GluR4 as opposed to those containing GluR1. PEPA has antianxiety effects.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.53%
- No. CAS: 141286-78-4
- Fòrmula: C16H16F2N2O4S2
- Peso molecular:402.44
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
HY-10933
CX516AMPA Receptor PAM -
HY-103228
GYKI 53655 hydrochlorideAMPA Antagonist -
HY-12506A
Naspm trihydrochlorideCP-AMPA Receptors Antagonist -
HY-10934
MibampatoriGluR Activator -
HY-10932
AniracetamNootropics and Neuroprotective Agent -
HY-12508
CMPDAiGluR Agonist -
HY-13456
LY-404187AMPA Modulator -
HY-15068
NBQXAMPA Receptor Antagonist -
HY-101528
IDRA 21AMPA Modulator -
HY-10937
Farampator -
HY-103230
IEM-1460 -
HY-12505
CX546Autophagy Inducer
Ver todos los productos específicos de isoformas iGluR
More
Actividad biológica
Descripciòn
In Vitro
PEPA dose-dependently potentiates AMPA-induced increase of [Ca2+]i in rat hippocampal cultures[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male C57BL/6J mice (10-12 weeks old) were applied stress (a 2 h restraint, a 20 min forced swim, and ether inhalation)[3]
-
Dosage:3 mg/kg, 10 mg/kg, 30 mg/kg
-
Administration:i.p.; once
-
Result:The significant decrease of the freezing response in the extinction sessions was only seen in the 30 mg/kg.
Ensayo clínico
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
No. CAS 141286-78-4
-
Appearance Solid
-
Peso molecular 402.44
-
Fòrmula C16H16F2N2O4S2
-
Color White to off-white
-
SMILES
FC1=CC(SCCNS(C2=CC=CC=C2)(=O)=O)=CC(F)=C1OCC(N)=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvente y solubilidad
In Vitro:
DMSO : 50 mg/mL (124.24 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.21 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.21 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Sekiguchi M, et al. Pharmacological detection of AMPA receptor heterogeneity by use of two allosteric potentiators in rat hippocampal cultures. Br J Pharmacol. 1998 Apr;123(7):1294-303. [Content Brief]
[2]. Ahmed AH, et al. Molecular mechanism of flop selectivity and subsite recognition for an AMPA receptor allosteric modulator: structures of GluA2 and GluA3 in complexes with PEPA. Biochemistry. 2010 Apr 6;49(13):2843-50. [Content Brief]
[3]. Yamada D, et al. Facilitating actions of an AMPA receptor potentiator upon extinction of contextually conditioned fear response in stressed mice. Neurosci Lett. 2011 Jan 25;488(3):242-6. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4848 mL | 12.4242 mL | 24.8484 mL | 62.1211 mL |
| 5 mM | 0.4970 mL | 2.4848 mL | 4.9697 mL | 12.4242 mL | |
| 10 mM | 0.2485 mL | 1.2424 mL | 2.4848 mL | 6.2121 mL | |
| 15 mM | 0.1657 mL | 0.8283 mL | 1.6566 mL | 4.1414 mL | |
| 20 mM | 0.1242 mL | 0.6212 mL | 1.2424 mL | 3.1061 mL | |
| 25 mM | 0.0994 mL | 0.4970 mL | 0.9939 mL | 2.4848 mL | |
| 30 mM | 0.0828 mL | 0.4141 mL | 0.8283 mL | 2.0707 mL | |
| 40 mM | 0.0621 mL | 0.3106 mL | 0.6212 mL | 1.5530 mL | |
| 50 mM | 0.0497 mL | 0.2485 mL | 0.4970 mL | 1.2424 mL | |
| 60 mM | 0.0414 mL | 0.2071 mL | 0.4141 mL | 1.0354 mL | |
| 80 mM | 0.0311 mL | 0.1553 mL | 0.3106 mL | 0.7765 mL | |
| 100 mM | 0.0248 mL | 0.1242 mL | 0.2485 mL | 0.6212 mL |
PEPA Related Classifications
HY-12509 Related Classifications
Powered by Bioz