Fluticasone
Based on 1 Customer Validation
Fluticasone is an inhaled corticosteroid used for respiratory research. Fluticasone is a Smo agonist with an IC50 value of 99 nM. Fluticasone activates Hedgehog signaling and promotes the proliferation of primary neuronal stem or precursor cells.
For research use only. We do not sell to patients.
- Purity: 98.70%
- CAS No.: 90566-53-3
- Formula: C22H27F3O4S
- Molecular Weight:444.51
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Anti-Infection Compound Library
HY-L002
-
Immunology/Inflammation Compound Library
HY-L007
-
Stem Cell Signaling Compound Library
HY-L017
-
Wnt/Hedgehog/Notch Compound Library
HY-L020
-
FDA-Approved Drug Library
HY-L022
-
Anti-Aging Compound Library
HY-L034
-
Drug Repurposing Compound Library
HY-L035
-
Covalent Screening Library
HY-L036
-
Reprogramming Compound Library
HY-L039
-
Endocrinology Compound Library
HY-L047
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Rare Diseases Drug Library
HY-L102
-
Nuclear Receptor Compound Library
HY-L126
-
Non-steroidal Anti-Inflammatory Compound Library
HY-L130
-
Pain-Related Compound Library
HY-L139
-
Off-patent Drug Library
HY-L141
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Covalent Screening Library Plus
HY-L036P
-
Drug Repurposing Compound Library Plus
HY-L035P
-
FDA-Approved Drug Library Plus
HY-L022P
-
FDA-Approved Drug Library Mini
HY-L022M
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
Fluticasone (0-10 μM, 2 h) inhibits U2OS cells growth with an EC50 value of 99 nM[2].
Fluticasone (10-1000 nM, 48 h) decreases HRV-induced mucin production and involves in modulation of SPDEF-regulated genes and extracellular ATP release[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 mice[4]
-
Dosage:1 mg/kg
-
Administration:Intranasal dropping; 1 h before infection with rhinovirus 1B; 7 days
-
Result:Suppressed BAL neutrophil numbers and inhibited rhinovirus-induced airway inflammation.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 90566-53-3
-
Appearance Solid
-
Molecular Weight 444.51
-
Formula C22H27F3O4S
-
Color White to off-white
-
SMILES
C[C@]([C@](O)1C(SCF)=O)(C[C@@H]2O)[C@](C[C@H]1C)([H])[C@@](C[C@@H]3F)([H])[C@]2([C@](C3=CC4=O)(C=C4)C)F
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 50 mg/mL (112.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.62 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Seidel P, et al. Thiazolidinediones inhibit airway smooth muscle release of the chemokine CXCL10: in vitro comparison with current asthma therapies. Respir Res. 2012 Oct 4. 13(1):90. [Content Brief]
[2]. Wang J, et al. Identification of select glucocorticoids as Smoothened agonists: potential utility for regenerative medicine. Proc Natl Acad Sci U S A. 2010 May 18. 107(20):9323-8. [Content Brief]
[3]. Ying Wang, et al. Tiotropium and Fluticasone Inhibit Rhinovirus-Induced Mucin Production via Multiple Mechanisms in Differentiated Airway Epithelial Cells. Front. Cell. Infect. Microbiol., 2020 Jun. [Content Brief]
[4]. Singanayagam A, et al. Effect of fluticasone propionate on virus-induced airways inflammation and anti-viral immune responses in mice. Lancet. 2015 Feb 26. 385(Suppl 1):S88. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2497 mL | 11.2483 mL | 22.4967 mL | 56.2417 mL |
| 5 mM | 0.4499 mL | 2.2497 mL | 4.4993 mL | 11.2483 mL | |
| 10 mM | 0.2250 mL | 1.1248 mL | 2.2497 mL | 5.6242 mL | |
| 15 mM | 0.1500 mL | 0.7499 mL | 1.4998 mL | 3.7494 mL | |
| 20 mM | 0.1125 mL | 0.5624 mL | 1.1248 mL | 2.8121 mL | |
| 25 mM | 0.0900 mL | 0.4499 mL | 0.8999 mL | 2.2497 mL | |
| 30 mM | 0.0750 mL | 0.3749 mL | 0.7499 mL | 1.8747 mL | |
| 40 mM | 0.0562 mL | 0.2812 mL | 0.5624 mL | 1.4060 mL | |
| 50 mM | 0.0450 mL | 0.2250 mL | 0.4499 mL | 1.1248 mL | |
| 60 mM | 0.0375 mL | 0.1875 mL | 0.3749 mL | 0.9374 mL | |
| 80 mM | 0.0281 mL | 0.1406 mL | 0.2812 mL | 0.7030 mL | |
| 100 mM | 0.0225 mL | 0.1125 mL | 0.2250 mL | 0.5624 mL |
Fluticasone Related Classifications
HY-B0603 Related Classifications
Powered by Bioz