ABL127
Based on 1 Customer Validation
ABL127 is a selective and covalent inhibitor of protein methylesterase 1 (PME-1) with IC50s of 6.4 nM and 4.2 nM in HEK293T and MDA-MB-231 cells, respectively.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.6%
- No. CAS: 1073529-41-5
- Fòrmula: C17H20N2O5
- Peso molecular:332.35
-
Almacenamiento:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
IC50: 6.4 nM (PME-1 in HEK293T), 4.2 nM (PME-1 in MDA-MB-231)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| MDA-MB-231 | IC50 |
10 nM
Compound: 1, ABL127
|
Inhibition of PME1 binding to FP-rhodamine in human MDA-MB-231 cells after 30 mins by fluorescence polarization activity-based protein profiling assay
Inhibition of PME1 binding to FP-rhodamine in human MDA-MB-231 cells after 30 mins by fluorescence polarization activity-based protein profiling assay
|
[PMID: 21639134] |
Three described PME-1 inhibitors are tested in this assay and a thermal shift with 100 μM ABL127 is detected. Using 25 or 50 μM ABL127 also shows a shift in protein melting temperature. It is found that treatment of Ishikawa cells with ABL127 and AMZ-30 significantly decreases cell proliferation similarly to depletion of PME-1 with shRNA. It is also found that treatment of ECC-1 cells with ABL127 or AMZ-30 affects cell invasion in a dose-dependent manner. The treatment of EC cells with ABL127 leads to a significant ~45 % increase in protein phosphatase 2A (PP2A) activity, while treatment with AMZ-30 leads to a modest ~10 % increase in PP2A activity[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 1073529-41-5
-
Appearance Oil
-
Peso molecular 332.35
-
Fòrmula C17H20N2O5
-
Color Colorless to off-white
-
SMILES
O=C(N1N(C(OC)=O)[C@@](C2=CC=CC=C2)(C3CCCC3)C1=O)OC
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : ≥ 100 mg/mL (300.89 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (7.52 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.52 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
Human PME-1 protein lacking the last three amino acids (PME-1des3) is purified from Sf9 cells. The assay is completed by first conducting a 10 min pre-incubation of 1 μM PME-1des3 with 100 μM ABL127, 100 μM AMZ-30, 100 μM EHT, or vehicle (0.05 % DMSO) in the presence of SYBR Orange (1:1000, v/v) at 37°C in 1× NEB buffer 2 (50 mM NaCl, 10 mM Tris-HCl, 10 mM MgCl2, 1 mM DTT, pH 7.9 at 25 °C); a thermal gradient is performed increasing temperature by 2°C per minute increments from 37 to 95°C, and fluorescence (492 to 610 nm) is acquired on a thermal cycler[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Cells are subjected to 5 μg/mL puromycin selection for 10 to 14 days and are clonally expanded. Validated clones are incubated with media and compounds (including ABL127) for the indicated times for phenotypic assays[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
ECC-1 cells are subcutaneously inoculated into the flanks of female SCID mice and are allowed to grow until tumors reached ~400 mm3. A single intratumoral dose of ABL127 diluted in 10% DMSO/PBS is administered. The highest concentration tested is 5 mg/kg of ABL127 due to poor solubility of the compound[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureza y Documentación
-
Ficha de datos (284 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Pusey M, et al. Inhibition of protein methylesterase 1 decreased cancerous phenotypes in endometrial adenocarcinoma cell lines and xenograft tumor models. Tumour Biol. 2016 Sep;37(9):11835-11842. [Content Brief]
[2]. Bachovchin DA, et al. Academic cross-fertilization by public screening yields a remarkable class of protein phosphatase methylesterase-1 inhibitors. Proc Natl Acad Sci U S A. 2011 Apr 26;108(17):6811-6. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0089 mL | 15.0444 mL | 30.0888 mL | 75.2219 mL |
| 5 mM | 0.6018 mL | 3.0089 mL | 6.0178 mL | 15.0444 mL | |
| 10 mM | 0.3009 mL | 1.5044 mL | 3.0089 mL | 7.5222 mL | |
| 15 mM | 0.2006 mL | 1.0030 mL | 2.0059 mL | 5.0148 mL | |
| 20 mM | 0.1504 mL | 0.7522 mL | 1.5044 mL | 3.7611 mL | |
| 25 mM | 0.1204 mL | 0.6018 mL | 1.2036 mL | 3.0089 mL | |
| 30 mM | 0.1003 mL | 0.5015 mL | 1.0030 mL | 2.5074 mL | |
| 40 mM | 0.0752 mL | 0.3761 mL | 0.7522 mL | 1.8805 mL | |
| 50 mM | 0.0602 mL | 0.3009 mL | 0.6018 mL | 1.5044 mL | |
| 60 mM | 0.0501 mL | 0.2507 mL | 0.5015 mL | 1.2537 mL | |
| 80 mM | 0.0376 mL | 0.1881 mL | 0.3761 mL | 0.9403 mL | |
| 100 mM | 0.0301 mL | 0.1504 mL | 0.3009 mL | 0.7522 mL |
ABL127 Related Classifications
HY-108317 Related Classifications
Powered by Bioz