BN82002
Based on 1 publication(s) in Google Scholar
BN82002 is a potent, selective and irreversible inhibitor of CDC25 phosphatase family. BN82002 inhibits CDC25A, CDC25B2, CDC25B3, CDC25C CDC25A, and 25C-cat with IC50 values of 2.4, 3.9, 6.3, 5.4, and 4.6 µM, respectively. BN82002 displays ~20-fold greater selectivity over CD45 tyrosine phosphatase.
Para uso exclusivo en investigación. No vendemos a pacientes.
- No. CAS: 396073-89-5
- Fòrmula: C19H25N3O4
- Peso molecular:359.42
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) BN82002
More
Actividad biológica
IC50: 2.4 μM (CDC25A), 3.9 μM (CDC25B2), 6.3 μM (CDC25B3), 5.4 μM (CDC25C), 4.6 μM (CDC25C-cat)[1].
The effect of BN82002 on cell proliferation is evaluated in vitro on several human tumor cell lines. Menadione, which has been reported to inhibit cell proliferation, is used as a control. All of the examined cell lines are sensitive to BN82002 and Menadione in a concentration-dependent manner in the low micromolar range. The most sensitive is the pancreatic cancer cell line MIA PaCa-2 with an IC50 of 7.2 μM, and the less sensitive cell line is the colon cancer HT-29 with an IC50 of 32.6 μM. The range of activity is very similar to the one observed with menadione (5-15 μM). It is also showed that 50 μM BN82002 is a concentration that fully inhibits cell proliferation, the cell cycle distribution is only modestly affected with a slight decrease in S phase and an increase in cells containing both a G1 and a G2 DNA content, suggesting that the cells treated with BN82002 are arrested at various stages of the cell cycle[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 396073-89-5
-
Appearance Solid
-
Peso molecular 359.42
-
Fòrmula C19H25N3O4
-
Color Light yellow to yellow
-
SMILES
OC1=C(CN(C)CCC2=CC=C([N+]([O-])=O)C=C2)C=C(N(C)C)C=C1OC
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
PLoS Genet
Subunit P60 of phosphatidylinositol 3-kinase promotes cell proliferation or apoptosis depending on its phosphorylation status. [Abstract]2021 Apr 26;17(4):e1009514. PMID: 33901186
Solvente y solubilidad
DMSO : ≥ 150 mg/mL (417.34 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (271 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7823 mL | 13.9113 mL | 27.8226 mL | 69.5565 mL |
| 5 mM | 0.5565 mL | 2.7823 mL | 5.5645 mL | 13.9113 mL | |
| 10 mM | 0.2782 mL | 1.3911 mL | 2.7823 mL | 6.9557 mL | |
| 15 mM | 0.1855 mL | 0.9274 mL | 1.8548 mL | 4.6371 mL | |
| 20 mM | 0.1391 mL | 0.6956 mL | 1.3911 mL | 3.4778 mL | |
| 25 mM | 0.1113 mL | 0.5565 mL | 1.1129 mL | 2.7823 mL | |
| 30 mM | 0.0927 mL | 0.4637 mL | 0.9274 mL | 2.3186 mL | |
| 40 mM | 0.0696 mL | 0.3478 mL | 0.6956 mL | 1.7389 mL | |
| 50 mM | 0.0556 mL | 0.2782 mL | 0.5565 mL | 1.3911 mL | |
| 60 mM | 0.0464 mL | 0.2319 mL | 0.4637 mL | 1.1593 mL | |
| 80 mM | 0.0348 mL | 0.1739 mL | 0.3478 mL | 0.8695 mL | |
| 100 mM | 0.0278 mL | 0.1391 mL | 0.2782 mL | 0.6956 mL |
BN82002 Related Classifications
HY-112776 Related Classifications
Powered by Bioz