Didesmethylrocaglamide
Based on 1 Customer Validation
Didesmethylrocaglamide, a derivative of Rocaglamide, is a potent eukaryotic initiation factor 4A (eIF4A) inhibitor. Didesmethylrocaglamide has potent growth-inhibitory activity with an IC50 of 5 nM. Didesmethylrocaglamide suppresses multiple growth-promoting signaling pathways and induces apoptosis in tumor cells. Antitumor activity.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.84%
- No. CAS: 177262-30-5
- Fòrmula: C27H27NO7
- Peso molecular:477.51
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
Eukaryotic initiation factor 4A (eIF4A)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HT-29 | ED50 |
0.021 μM
Compound: 13
|
Cytotoxicity against human HT-29 cells
Cytotoxicity against human HT-29 cells
|
[PMID: 23301897] |
| HT-29 | IC50 |
21 nM
Compound: Compound 3
|
Antiproliferative activity against human HT-29 cells after 3 days by SRB assay
Antiproliferative activity against human HT-29 cells after 3 days by SRB assay
|
[PMID: 35213158] |
Didesmethylrocaglamide (5 nM, and 10 nM; 72 hours; MPNST cells) treatment arrests MPNST cells at G2-M, increases the sub-G1 population, induces cleavage of caspases and PARP, and elevates the levels of the DNA-damage response marker γH2A.X, while decreasing the expression of AKT and ERK1/2[1].
Didesmethylrocaglamide inhibits MPNST cell proliferation by inducing cell cycle arrest at G2/M and subsequently, cell death. Didesmethylrocaglamide-treated 697-R cells exhibits IC50 values is very similar to those of parental 697 cells (4 vs 3nM of IC50, respectively)[1].
Didesmethylrocaglamide induces apoptosis in both neurofibromatosis type 1 (NF1)-expressing and NF1-deficient MPNST cells, possibly subsequent to the activation of the DNA damage response. Didesmethylrocaglamide-treated sarcoma cells show decreased levels of multiple oncogenic kinases, including insulin-like growth factor-1 receptor[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Malignant peripheral nerve sheath tumors (MPNST) cells
-
Concentration:5 nM, and 10 nM
-
Incubation Time:72 hours
-
Result:Induced cleavage of caspases and PARP, and elevated the levels of the DNA-damage response marker γH2A.X.
Chemical Information
-
No. CAS 177262-30-5
-
Appearance Solid
-
Peso molecular 477.51
-
Fòrmula C27H27NO7
-
Color White to off-white
-
SMILES
O=C([C@H]([C@H]1C2=CC=CC=C2)[C@@H](O)[C@]3(O)[C@@]1(C4=CC=C(OC)C=C4)OC5=CC(OC)=CC(OC)=C35)N
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvente y solubilidad
DMSO : 100 mg/mL (209.42 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (283 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0942 mL | 10.4710 mL | 20.9420 mL | 52.3549 mL |
| 5 mM | 0.4188 mL | 2.0942 mL | 4.1884 mL | 10.4710 mL | |
| 10 mM | 0.2094 mL | 1.0471 mL | 2.0942 mL | 5.2355 mL | |
| 15 mM | 0.1396 mL | 0.6981 mL | 1.3961 mL | 3.4903 mL | |
| 20 mM | 0.1047 mL | 0.5235 mL | 1.0471 mL | 2.6177 mL | |
| 25 mM | 0.0838 mL | 0.4188 mL | 0.8377 mL | 2.0942 mL | |
| 30 mM | 0.0698 mL | 0.3490 mL | 0.6981 mL | 1.7452 mL | |
| 40 mM | 0.0524 mL | 0.2618 mL | 0.5235 mL | 1.3089 mL | |
| 50 mM | 0.0419 mL | 0.2094 mL | 0.4188 mL | 1.0471 mL | |
| 60 mM | 0.0349 mL | 0.1745 mL | 0.3490 mL | 0.8726 mL | |
| 80 mM | 0.0262 mL | 0.1309 mL | 0.2618 mL | 0.6544 mL | |
| 100 mM | 0.0209 mL | 0.1047 mL | 0.2094 mL | 0.5235 mL |
Didesmethylrocaglamide Related Classifications
HY-19356A Related Classifications
Powered by Bioz