KAT modulator-1
Based on 1 Customer Validation
KAT modulator-1 (Compound 3) is a KAT modulator. KAT modulator-1 can interact with p300 full-length but not with the catalytic domain. KAT modulator-1 can be used for epigenetics research.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 98.0%
- No. CAS: 1314006-43-3
- Fòrmula: C20H36O2
- Peso molecular:308.50
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
HY-124960
CTPBHistone Acetyltransferase Activator -
HY-102058
WM-1119KAT6A Inhibitor -
HY-102060
WM-8014MOZ Inhibitor -
HY-132283
PF-9363KAT6A/KAT6B Inhibitor -
HY-16706A
Remodelin hydrobromideNAT10 Inhibitor -
HY-124696
PU139HAT Inhibitor -
HY-153444
PrifetrastatKAT6A/B Inhibitor -
HY-136285
CPI-1612EP300/CBP Inhibitor -
HY-107455
A-485p300/CBP Inhibitor -
HY-134964
CTBp300 Activator -
HY-134901
WM-3835HBO1 Inhibitor -
HY-129039
Butyrolactone 3Gcn5 Inhibitor
Actividad biológica
Descripciòn
In Vitro
KAT modulator-1 (Compound 3) (50 μM) inhibits recombinant acetyltransferase enzymes KAT3A by 79-83%[1].
KAT modulator-1 (15 and 30 μM) reduces H3 acetylation in histone extracts of U937 leukemia cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 1314006-43-3
-
Appearance Solid
-
Peso molecular 308.50
-
Fòrmula C20H36O2
-
Color White to off-white
-
SMILES
O=C(C)/C(C(C)=O)=C/CCCCCCCCCCCCCC
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
In Vitro:
DMSO : 100 mg/mL (324.15 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (8.10 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (266 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2415 mL | 16.2075 mL | 32.4149 mL | 81.0373 mL |
| 5 mM | 0.6483 mL | 3.2415 mL | 6.4830 mL | 16.2075 mL | |
| 10 mM | 0.3241 mL | 1.6207 mL | 3.2415 mL | 8.1037 mL | |
| 15 mM | 0.2161 mL | 1.0805 mL | 2.1610 mL | 5.4025 mL | |
| 20 mM | 0.1621 mL | 0.8104 mL | 1.6207 mL | 4.0519 mL | |
| 25 mM | 0.1297 mL | 0.6483 mL | 1.2966 mL | 3.2415 mL | |
| 30 mM | 0.1080 mL | 0.5402 mL | 1.0805 mL | 2.7012 mL | |
| 40 mM | 0.0810 mL | 0.4052 mL | 0.8104 mL | 2.0259 mL | |
| 50 mM | 0.0648 mL | 0.3241 mL | 0.6483 mL | 1.6207 mL | |
| 60 mM | 0.0540 mL | 0.2701 mL | 0.5402 mL | 1.3506 mL | |
| 80 mM | 0.0405 mL | 0.2026 mL | 0.4052 mL | 1.0130 mL | |
| 100 mM | 0.0324 mL | 0.1621 mL | 0.3241 mL | 0.8104 mL |
KAT modulator-1 Related Classifications
HY-153768 Related Classifications
Powered by Bioz