M8891
Based on 1 Customer Validation
M8891 is an orally active, reversible and brain penetrant Methionine Aminopeptidase-2 (MetAP-2) inhibitor with an IC50 of 54 nM and a Ki of 4.33 nM. M8891 does not inhibit MetAP-1 (IC50>10 µM). M8891 inhibits growth of primary endothelial cells as well as tumor cells and demonstrates antiangiogenic and antitumoral activity.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.69%
- No. CAS: 1464842-09-8
- Fòrmula: C20H17F2N3O3
- Peso molecular:385.36
-
Almacenamiento:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HUVEC | IC50 |
20 nM
Compound: 16; M8891
|
Inhibition of MetAP2 in HUVEC assessed as reduction in viability incubated for 3 days by CyQUANT Direct Cell proliferation assay
Inhibition of MetAP2 in HUVEC assessed as reduction in viability incubated for 3 days by CyQUANT Direct Cell proliferation assay
|
[PMID: 31725285] |
M8891 has an IC50 of 20 nM for HUVEC proliferation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
M8891 (iv; 0.2 mg/kg) shows low clearance (CL ~0.03-0.4 L/h/kg corresponding to ~1-6% of the liver blood-flow), small to medium volume of distribution (Vss ~0.23-1.3 L/kg), and medium to high oral bioavailability (F ~40-80%)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female CD-1 nude mice aged 6-7 weeks with human U87-MG glioblastoma[1]
-
Dosage:20 mg/kg
-
Administration:Po; once a day for 14 days
-
Result:Exhibited strong tumor growth inhibition.
-
Animal Model:Rat, dog and monkey[1]
-
Dosage:0.2 mg/kg (Pharmacokinetic Analysis)
-
Administration:IV
-
Result:Showed low clearance (CL ~0.03-0.4 L/h/kg corresponding to ~1-6% of the liver blood-flow), small to medium volume of distribution (Vss ~0.23-1.3 L/kg), and medium to high oral bioavailability (F ~40-80%).
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
No. CAS 1464842-09-8
-
Appearance Solid
-
Peso molecular 385.36
-
Fòrmula C20H17F2N3O3
-
Color Off-white to light yellow
-
SMILES
O=C([C@]1(O)C(N(C2=CC3=C(NC=C3)C=C2)CC1)=O)NCC4=CC(F)=CC(F)=C4
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvente y solubilidad
DMSO : 90 mg/mL (233.55 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5950 mL | 12.9749 mL | 25.9498 mL | 64.8744 mL |
| 5 mM | 0.5190 mL | 2.5950 mL | 5.1900 mL | 12.9749 mL | |
| 10 mM | 0.2595 mL | 1.2975 mL | 2.5950 mL | 6.4874 mL | |
| 15 mM | 0.1730 mL | 0.8650 mL | 1.7300 mL | 4.3250 mL | |
| 20 mM | 0.1297 mL | 0.6487 mL | 1.2975 mL | 3.2437 mL | |
| 25 mM | 0.1038 mL | 0.5190 mL | 1.0380 mL | 2.5950 mL | |
| 30 mM | 0.0865 mL | 0.4325 mL | 0.8650 mL | 2.1625 mL | |
| 40 mM | 0.0649 mL | 0.3244 mL | 0.6487 mL | 1.6219 mL | |
| 50 mM | 0.0519 mL | 0.2595 mL | 0.5190 mL | 1.2975 mL | |
| 60 mM | 0.0432 mL | 0.2162 mL | 0.4325 mL | 1.0812 mL | |
| 80 mM | 0.0324 mL | 0.1622 mL | 0.3244 mL | 0.8109 mL | |
| 100 mM | 0.0259 mL | 0.1297 mL | 0.2595 mL | 0.6487 mL |
M8891 Related Classifications
HY-133016 Related Classifications
Powered by Bioz