GUB10194 acetate
Based on 1 Customer Validation
GUB10194 acetate is a fully potent and selective GPR10 agonist with an EC50 of 15 nM. GUB10194 acetate does not significantly affect body weight or food intake.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 98.75%
- Formule: C85H148N24O23·xC2H4O2
- Masse moléculaire:1874.23 (free base)
-
Stockage:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Description
In Vitro
GUB10194 (30 min) acetate acts as a full, GPR10-selective agonist in Chem-1 cells expressing GPR10 (EC50 = 15 nM), with no activity detected in CHO-K1 cells expressing NPFF2R (EC50 > 5000 nM)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6J (male, 5 weeks old at purchase, diet-induced obese)[1]
-
Dosage:1250 nmol/kg
-
Administration:s.c.; twice daily
-
Result:Did not significantly influence body weight or food intake during treatment or wash-out period.
Was detected in plasma samples collected 4 hours after the last dose on treatment day 6.
Chemical Information
-
Appearance Solid
-
Masse moléculaire 1874.23 (free base)
-
Formule C85H148N24O23·xC2H4O2
-
Color White to off-white
-
SMILES
O=C(N[C@@H](CCCNC(N)=N)C(NCC(N[C@@H](CCCCNC(COCCOCCNC(COCCOCCNC(CC[C@H](NC(CCCCCCCCCCCCCCCCC(O)=O)=O)C(O)=O)=O)=O)=O)C(N[C@@H](CCCNC(N)=N)C(N1[C@@H](CCC1)C(N[C@@H](C(C)C)C(NCC(N[C@@H](CCCNC(N)=N)C(N[C@@H](CC2=CC=CC=C2)C(N)=O)=O)=O)=O)=O)=O)=O)=O)=O)[C@H](CO)N.CC(O)=O.[x]
-
Sequence
Ser-Arg-Gly-{Lys(AEEA-AEEA-γGlu-C18 diacid)}-Arg-Pro-Val-Gly-Arg-Phe-NH2
-
Sequence Shortening
SRG-{Lys(AEEA-AEEA-γGlu-C18 diacid)}-RPVGRF-NH2
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
In Vitro:
DMSO : 33.33 mg/mL (Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL; Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL; Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Calculators
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
GUB10194 acetate Related Classifications
HY-P11811A Related Classifications
Powered by Bioz