DPM-1001
Based on 1 Customer Validation
DPM-1001 is a potent, specific, orally active and non-competitive inhibitor of protein-tyrosine phosphatase (PTP1B) with an IC50 of 100 nM. DPM-1001 is an analog of the specific PTP1B inhibitor MSI-1436. DPM-1001 has anti-diabetic property.
For research use only. We do not sell to patients.
- Purity: 99.84%
- CAS No.: 1471172-27-6
- Formula: C35H57N3O3
- Molecular Weight:567.85
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
IC50: 100 nM (PTP1B)[1]
DPM-1001 inhibits the short form of PTP1B reversibly, whereas PTP1B(1-405) remained inactive over an extended period of time. DPM-1001 is against PTP1B(1-405) with no pre-incubation, the IC50 value for PTP1B(1-405) is 600 nM. However, after a 30-min pre-incubation, the potency is improved to 100 nM. In contrast, there is no obvious time-dependent change in the IC50 value for PTP1B(1-321)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:18 weeks of age, high-fat diet (HFD)-fed obese male mice (C57bl6/J)[1]
-
Dosage:5 mg/kg
-
Administration:Oral or intraperitoneal administration; 5 mg/kg; once daily; 50 days
-
Result:Led to an 5% decrease in body weight.Improved glucose tolerance and insulin sensitivity in glucose tolerance and insulin tolerance in vivo.
Chemical Information
-
CAS No. 1471172-27-6
-
Appearance Solid
-
Molecular Weight 567.85
-
Formula C35H57N3O3
-
Color Off-white to light yellow
-
SMILES
O[C@H]1[C@]2([H])[C@@](CC[C@@]3(C)[C@@]2([H])CC[C@]3([H])[C@H](C)CCC(OC)=O)([H])[C@]4(C)[C@@](C[C@H](NCCCCNCC5=CC=CC=N5)CC4)([H])C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (176.10 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (4.40 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7610 mL | 8.8051 mL | 17.6103 mL | 44.0257 mL |
| 5 mM | 0.3522 mL | 1.7610 mL | 3.5221 mL | 8.8051 mL | |
| 10 mM | 0.1761 mL | 0.8805 mL | 1.7610 mL | 4.4026 mL | |
| 15 mM | 0.1174 mL | 0.5870 mL | 1.1740 mL | 2.9350 mL | |
| 20 mM | 0.0881 mL | 0.4403 mL | 0.8805 mL | 2.2013 mL | |
| 25 mM | 0.0704 mL | 0.3522 mL | 0.7044 mL | 1.7610 mL | |
| 30 mM | 0.0587 mL | 0.2935 mL | 0.5870 mL | 1.4675 mL | |
| 40 mM | 0.0440 mL | 0.2201 mL | 0.4403 mL | 1.1006 mL | |
| 50 mM | 0.0352 mL | 0.1761 mL | 0.3522 mL | 0.8805 mL | |
| 60 mM | 0.0294 mL | 0.1468 mL | 0.2935 mL | 0.7338 mL | |
| 80 mM | 0.0220 mL | 0.1101 mL | 0.2201 mL | 0.5503 mL | |
| 100 mM | 0.0176 mL | 0.0881 mL | 0.1761 mL | 0.4403 mL |
DPM-1001 Related Classifications
HY-121515 Related Classifications
Powered by Bioz