KAT6A/KAT7-IN-4
KAT6A/KAT7-IN-4 is a KAT6A and KAT7 inhibitor. KAT6A/KAT7-IN-4 has IC50 values of both ≤ 1 nM for KAT6A and KAT7. KAT6A/KAT7-IN-4 can inhibit the acetylation of H3K14 and H3K23. KAT6A/KAT7-IN-4 also inhibits tumor cell proliferation, with an IC50 of ≤ 100 nM for CAMA-1. KAT6A/KAT7-IN-4 can be used in the study of breast cancer.
For research use only. We do not sell to patients.
- CAS No.: 3092067-21-2
- Formula: C31H36N4O7S
- Molecular Weight:608.71
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
|
HBO1 <1 nM (IC50) |
MOZ/MORF <1 nM (IC50) |
Chemical Information
-
CAS No. 3092067-21-2
-
Appearance Solid
-
Molecular Weight 608.71
-
Formula C31H36N4O7S
-
Color Off-white to light yellow
-
SMILES
O=S(C1=C(OC)C=C(C(N2C[C@@H](C)O[C@H](C)C2)=O)C=C1OC)(NC3=NOC4=C3CC5(C6=C4C=C(N7CCC7)C=C6)CC5)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (164.28 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6428 mL | 8.2141 mL | 16.4282 mL | 41.0705 mL |
| 5 mM | 0.3286 mL | 1.6428 mL | 3.2856 mL | 8.2141 mL | |
| 10 mM | 0.1643 mL | 0.8214 mL | 1.6428 mL | 4.1070 mL | |
| 15 mM | 0.1095 mL | 0.5476 mL | 1.0952 mL | 2.7380 mL | |
| 20 mM | 0.0821 mL | 0.4107 mL | 0.8214 mL | 2.0535 mL | |
| 25 mM | 0.0657 mL | 0.3286 mL | 0.6571 mL | 1.6428 mL | |
| 30 mM | 0.0548 mL | 0.2738 mL | 0.5476 mL | 1.3690 mL | |
| 40 mM | 0.0411 mL | 0.2054 mL | 0.4107 mL | 1.0268 mL | |
| 50 mM | 0.0329 mL | 0.1643 mL | 0.3286 mL | 0.8214 mL | |
| 60 mM | 0.0274 mL | 0.1369 mL | 0.2738 mL | 0.6845 mL | |
| 80 mM | 0.0205 mL | 0.1027 mL | 0.2054 mL | 0.5134 mL | |
| 100 mM | 0.0164 mL | 0.0821 mL | 0.1643 mL | 0.4107 mL |
Powered by Bioz