SH5-07
Based on 1 publication(s) in Google Scholar
SH5-07 is a hydroxamic acid based Stat3 inhibitor with an IC50 of 3.9 μM in in vitro assay.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.0%
- CAS No.: 1456632-41-9
- 화학식: C29H28F5N3O5S
- 분자량:625.61
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) SH5-07
More
Biological Activity
|
STAT3 3.9 μM (IC50) |
SH5-07 is a hydroxamic acid analog of BP-1-102. SH5-07 dose-dependently inhibits Stat3 activity with an IC50 of 3.9±0.6 μM in in vitro assay. It preferentially inhibits Stat3:Stat3 DNA-binding activity, ahead of inhibiting Stat1:Stat3 activity, with minimal effects on Stat1:Stat1 activity. SH5-07 binds Stat3, disrupts Stat3 association with growth factor receptor, and thereby inhibits Stat3 phosphorylation. It induces antitumor cell effects against malignant cells harboring constitutively-active Stat3. SH5-07 inhibits the expression of known Stat3-regulated genes. Bcl-2, Bcl-xL, c-Myc, Survivin, Cyclin D1 and Mcl-1 expression is reduced in response to 24 h, 5 μM SH5-07 treatment[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1456632-41-9
-
Appearance Solid
-
분자량 625.61
-
화학식 C29H28F5N3O5S
-
Color White to off-white
-
SMILES
O=C(NO)C1=CC=C(N(CC2=CC=C(C3CCCCC3)C=C2)C(CN(C)S(=O)(C4=C(F)C(F)=C(F)C(F)=C4F)=O)=O)C=C1
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Mediators Inflamm
Lipopolysaccharide Inhibits Autophagy and Promotes Inflammatory Responses via p38 MAPK-Induced Proteasomal Degradation of Atg13 in Hepatic Stellate Cells. [Abstract]2022 Sep 13;2022:9603989. PMID: 36148140
용액&용해도
DMSO : 100 mg/mL (159.84 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.00 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Cells are treated with 0-8 μM agent for 24-48 h. For cell cycle profile analysis, cells are harvested and fixed with 70% ice-cold ethanol and stained with propidium iodide (PI). For apoptosis analysis, cells are collected and stained with FITC-Annexin V using Apoptosis Detection Kit. Both the DNA content of cells and the Annexin V-positive cells are analyzed by FACScan flow cytometer. Cell cycle phase distribution is analyzed using the Cell-Fit program. Data acquisition is gated to exclude cell doublets[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice: Mice are injected subcutaneously in the left flank area with U251MG cells in 200 μL of PBS/Matrigel matrix, or MDA-MB-231 cells in 100 μL of PBS. Mice with tumors of 90-150 mm3 (MDA-MB-231) or 150 mm3 (U251MG) are grouped for identical mean tumor sizes, administered 3, 5 or 6 mg/kg SH5-07 or SH4-54 via oral gavage daily or tail vein injection every 2 or 3 days, and monitored every 3-7 days. Tumor sizes are measured with calipers and converted to tumor volume[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
순도&문서
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.5984 mL | 7.9922 mL | 15.9844 mL | 39.9610 mL |
| 5 mM | 0.3197 mL | 1.5984 mL | 3.1969 mL | 7.9922 mL | |
| 10 mM | 0.1598 mL | 0.7992 mL | 1.5984 mL | 3.9961 mL | |
| 15 mM | 0.1066 mL | 0.5328 mL | 1.0656 mL | 2.6641 mL | |
| 20 mM | 0.0799 mL | 0.3996 mL | 0.7992 mL | 1.9980 mL | |
| 25 mM | 0.0639 mL | 0.3197 mL | 0.6394 mL | 1.5984 mL | |
| 30 mM | 0.0533 mL | 0.2664 mL | 0.5328 mL | 1.3320 mL | |
| 40 mM | 0.0400 mL | 0.1998 mL | 0.3996 mL | 0.9990 mL | |
| 50 mM | 0.0320 mL | 0.1598 mL | 0.3197 mL | 0.7992 mL | |
| 60 mM | 0.0266 mL | 0.1332 mL | 0.2664 mL | 0.6660 mL | |
| 80 mM | 0.0200 mL | 0.0999 mL | 0.1998 mL | 0.4995 mL | |
| 100 mM | 0.0160 mL | 0.0799 mL | 0.1598 mL | 0.3996 mL |