E0199
Based on 1 Customer Validation
E0199 is a novel potent dual-target KV7/NaV modulator that activates the KV7 channel (KV7.2/7.3 (EC50 = 12.78 nM), KV7.2 (EC50 = 0.50 μM), and KV7.5 (EC50 = 27.14 nM) channels) while simultaneously blocks the NaV1.7 (IC50 = 0.52 μM), NaV1.8 (IC50 = 0.24 μM), and NaV1.9 (IC50 = 0.16 μM) channels. E0199 shows a potent analgesic effect without affecting heart and skeletal muscle ion channels critically in a chronic constriction injury (CCI) mouse model. E0199 can be used for Neuropathic pain (NP) research.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.89%
- CAS No.: 931928-13-1
- 화학식: C29H37N5O5
- 분자량:535.63
-
보관:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
Membrane Transporter/Ion Channel Compound Library
HY-L011
-
Neuroprotective Compound Library
HY-L070
-
Sodium Channel Blocker Library
HY-L118
-
Potassium Channel Compound Library
HY-L119
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Inhibitors Library
HY-L158
-
Highly Selective Activators Library
HY-L159
-
Ion Channel Compound Library
HY-L166
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
|
Nav1.7 0.52 μM (IC50) |
Nav1.8 0.24 μM (IC50) |
Nav1.9 0.16 μM (IC50) |
E0199 (0.1-10 μM) influences the inactivation process of the NaV1.7, NaV1.8, and NaV1.9 channels, facilitating channel inactivation and impacting the extent of the shift of the inactive curve in the sequence: NaV1.8 > NaV1.9 > NaV1.7[1].
E0199 (0.03-10 μM) activates KV7.2-KV7.5 channels, moving their activation curve towards the hyperpolarisation direction and opening KV7 channels, demonstrating a rank order of potency of KV7.2/7.3 > KV7.2 > KV7.5 > KV7.4[1].
E0199 (1-10 μM) significantly influences action potential (AP) firing parameters in the CCI model rat Dorsal Root Ganglion (DRG) neurons in a dose-dependent manner, affecting the threshold, rheobase, amplitude, and Resting Membrane Potential (RMP)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male C57 mice (8-10 weeks old) with CCI under isoflurane anesthesia[1]
-
Dosage:1, 5, and 20 mg/kg
-
Administration:i.p., daily from day 11 to 30 after the induction of CCI
-
Result:Significantly alleviated thermal, mechanical, and cold hypersensitivity in CCI mice with effects observed across all dose levels.
Maintained significantly higher thermal and mechanical withdrawal thresholds than the model group even on day 15 at 5 mg/kg.
Showed a significant increase in the mechanical withdrawal threshold on day 15 at 1 mg/kg.
Maintained higher cold withdrawal thresholds than other groups at 5 and 20 mg/kg.
Prolonged the time and the distance of movement in the central open field.
Enhanced the total distance and average speed, and improved exploratory ability in the elevated plus maze.
Increased movement time in the open arms and central zone compared to the model group, with no significant difference between the blank and sham surgery groups at 20 mg/kg.
Significantly reduced the proportion of movement time spent in the dark arms from 88.37% to 67.51% and 61.68%, at 5 and 20 mg/kg, respectively.
Chemical Information
-
CAS No. 931928-13-1
-
Appearance Oil
-
분자량 535.63
-
화학식 C29H37N5O5
-
Color Colorless to light yellow
-
SMILES
COC1=C(C=CC(CC(N2CCN(CC2)CC3=NOC(CCC(N(CC4=CC=CC=C4)CC)=O)=N3)=O)=C1)OC
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : 50 mg/mL (93.35 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.67 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.67 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8670 mL | 9.3348 mL | 18.6696 mL | 46.6740 mL |
| 5 mM | 0.3734 mL | 1.8670 mL | 3.7339 mL | 9.3348 mL | |
| 10 mM | 0.1867 mL | 0.9335 mL | 1.8670 mL | 4.6674 mL | |
| 15 mM | 0.1245 mL | 0.6223 mL | 1.2446 mL | 3.1116 mL | |
| 20 mM | 0.0933 mL | 0.4667 mL | 0.9335 mL | 2.3337 mL | |
| 25 mM | 0.0747 mL | 0.3734 mL | 0.7468 mL | 1.8670 mL | |
| 30 mM | 0.0622 mL | 0.3112 mL | 0.6223 mL | 1.5558 mL | |
| 40 mM | 0.0467 mL | 0.2334 mL | 0.4667 mL | 1.1669 mL | |
| 50 mM | 0.0373 mL | 0.1867 mL | 0.3734 mL | 0.9335 mL | |
| 60 mM | 0.0311 mL | 0.1556 mL | 0.3112 mL | 0.7779 mL | |
| 80 mM | 0.0233 mL | 0.1167 mL | 0.2334 mL | 0.5834 mL |
E0199 Related Classifications
HY-178281 Related Classifications
Powered by Bioz