Eplivanserin (mixture)
Based on 1 Customer Validation
Eplivanserin mixture (SR-46349 mixture) is a selective serotonin reuptake inhibitor and a 5-HT2A receptor antagonist, extracted from patent WO 2005/002578 A1.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.68%
- CAS No.: 130581-13-4
- 화학식: C19H21FN2O2
- 분자량:328.38
-
보관:Powder -20°C, 3 years , 4°C, 2 years
* The compound is unstable in solutions, freshly prepared is recommended.
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
All 5-HT Receptor Isoforms
More
Biological Activity
|
5-HT2A Receptor |
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 130581-13-4
-
Appearance Solid
-
분자량 328.38
-
화학식 C19H21FN2O2
-
Color Off-white to pink
-
SMILES
OC1=CC=C(/C=C/C(C2=CC=CC=C2F)=N/OCCN(C)C)C=C1
-
Synonyms
SR-46349 (mixture)
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years * The compound is unstable in solutions, freshly prepared is recommended.
용액&용해도
DMSO : 125 mg/mL (380.66 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (6.33 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (6.33 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * The compound is unstable in solutions, freshly prepared is recommended.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (269 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0453 mL | 15.2263 mL | 30.4525 mL | 76.1313 mL |
| 5 mM | 0.6091 mL | 3.0453 mL | 6.0905 mL | 15.2263 mL | |
| 10 mM | 0.3045 mL | 1.5226 mL | 3.0453 mL | 7.6131 mL | |
| 15 mM | 0.2030 mL | 1.0151 mL | 2.0302 mL | 5.0754 mL | |
| 20 mM | 0.1523 mL | 0.7613 mL | 1.5226 mL | 3.8066 mL | |
| 25 mM | 0.1218 mL | 0.6091 mL | 1.2181 mL | 3.0453 mL | |
| 30 mM | 0.1015 mL | 0.5075 mL | 1.0151 mL | 2.5377 mL | |
| 40 mM | 0.0761 mL | 0.3807 mL | 0.7613 mL | 1.9033 mL | |
| 50 mM | 0.0609 mL | 0.3045 mL | 0.6091 mL | 1.5226 mL | |
| 60 mM | 0.0508 mL | 0.2538 mL | 0.5075 mL | 1.2689 mL | |
| 80 mM | 0.0381 mL | 0.1903 mL | 0.3807 mL | 0.9516 mL | |
| 100 mM | 0.0305 mL | 0.1523 mL | 0.3045 mL | 0.7613 mL |
Eplivanserin (mixture) Related Classifications
HY-10792A Related Classifications
Powered by Bioz