KYP-2047
Based on 1 publication(s) in Google Scholar
KYP-2047 is a potent and BBB-penetrating prolyl-oligopeptidase (POP) inhibitor, with an Ki value of 0.023 nM. KYP-2047 reduces glioblastoma proliferation through angiogenesis and apoptosis modulation.
For research use only. We do not sell to patients.
- Purity: 99.94%
- CAS No.: 796874-99-2
- Formula: C20H25N3O2
- Molecular Weight:339.43
-
Storage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) KYP-2047
More
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | IC50 |
>10 μM
Compound: 17, KYP-2047
|
Inhibition of mouse recombinant FAP expressed in HEK293 cells assessed as pNA release from Ala-Pro-p-nitroanilide pre-incubated with enzyme for 15 mins prior to substrate addition by fluorescence technique
Inhibition of mouse recombinant FAP expressed in HEK293 cells assessed as pNA release from Ala-Pro-p-nitroanilide pre-incubated with enzyme for 15 mins prior to substrate addition by fluorescence technique
|
[PMID: 23121075] |
KYP-2047 (0-100 μM) decreases U-87, U-138 and A-172 cell viability in a concentration-dependent manner[2].
KYP-2047 (0-100 μM) increases the pro-apoptotic protein Bax, p53 and caspase-3 expression whereas reduces Bcl-2 expression, and reduced significantly TGF-β expression[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:U-87, U-138 and A-172 cell[2]
-
Concentration:0.01 μM, 0.1 μM, 0.5 μM, 1 μM, 10 μM, 30 μM, 50 μM and 100 μM
-
Incubation Time:24 h
-
Result:Decreased U-87, U-138 and A-172 cell viability in a concentration-dependent manner.
-
Cell Line:U-87 cell[2]
-
Concentration:0, 50, 100 μM
-
Incubation Time:24 h
-
Result:Increased the pro-apoptotic protein Bax, p53 and cleaved-caspase-3 expression, reduced significantly Bcl2 expression, reduced Ang1 and Ang2 expression, and decreased Ki-67 expression.
KYP-2047 (9 or 27 μmol/kg; IP; once, 1 or 3 h before decapitation; two daily doses for 10 days) increases neurotensin concentration in the hypothalamus[1].
KYP-2047 (0-5 mg/kg) significantly reduces tumor mass and neutrophil infiltration[2].
KYP-2047 (0-5 mg/kg) significantly reduces vascular endothelial-growth-factor (VEGF), CD34, angiopoietins (Ang) and endothelial-nitric-oxide synthase (eNOS) expression[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 796874-99-2
-
Appearance Solid-Liquid Mixture
-
Molecular Weight 339.43
-
Formula C20H25N3O2
-
Color Colorless to light yellow
-
SMILES
N#C[C@H]1N(C([C@H]2N(C(CCCC3=CC=CC=C3)=O)CCC2)=O)CCC1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
J Med Chem
Structure-Guided Optimization of 4-Chloro-Pyrazolopyridine Analogs for Covalent PREP Inhibition. [Abstract]2026 Jan 22;69(2):1303-1321. PMID: 41512187
Solvent & Solubility
DMSO : 100 mg/mL (294.61 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (7.37 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (7.37 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Jalkanen AJ, et al. Beneficial effect of prolyl oligopeptidase inhibition on spatial memory in young but not in old scopolamine-treated rats. Basic Clin Pharmacol Toxicol. 2007 Feb;100(2):132-8. [Content Brief]
[2]. Scuderi SA, et al. KYP-2047, an Inhibitor of Prolyl-Oligopeptidase, Reduces GlioBlastoma Proliferation through Angiogenesis and Apoptosis Modulation. Cancers (Basel). 2021 Jul 9;13(14):3444. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.9461 mL | 14.7306 mL | 29.4612 mL | 73.6529 mL |
| 5 mM | 0.5892 mL | 2.9461 mL | 5.8922 mL | 14.7306 mL | |
| 10 mM | 0.2946 mL | 1.4731 mL | 2.9461 mL | 7.3653 mL | |
| 15 mM | 0.1964 mL | 0.9820 mL | 1.9641 mL | 4.9102 mL | |
| 20 mM | 0.1473 mL | 0.7365 mL | 1.4731 mL | 3.6826 mL | |
| 25 mM | 0.1178 mL | 0.5892 mL | 1.1784 mL | 2.9461 mL | |
| 30 mM | 0.0982 mL | 0.4910 mL | 0.9820 mL | 2.4551 mL | |
| 40 mM | 0.0737 mL | 0.3683 mL | 0.7365 mL | 1.8413 mL | |
| 50 mM | 0.0589 mL | 0.2946 mL | 0.5892 mL | 1.4731 mL | |
| 60 mM | 0.0491 mL | 0.2455 mL | 0.4910 mL | 1.2275 mL | |
| 80 mM | 0.0368 mL | 0.1841 mL | 0.3683 mL | 0.9207 mL | |
| 100 mM | 0.0295 mL | 0.1473 mL | 0.2946 mL | 0.7365 mL |